Author Topic: David's Z80 Assembly Questions (Read 17131 times)

Munchor · « **on:** May 13, 2011, 03:38:10 pm »

I decided to create a topic to gather all my z80 asm questions since I have a few and I'm still learning.

First of all, I'd like you guys to know how advanced I am, this was my (best?) program:

Code: [Select]

.nolist  
#include "ti83plus.inc"  
.list  
   .org userMem-2  
   .db $BB,$6D  
Init:  
  B_CALL _ClrLCDFull  
    
  ld hl,0
  ld (curCol), hl
  ld hl,Welcome
  B_CALL _PutS

  B_CALL _GetKey  
    
  cp kEnter  
    
  jr z,Win  
    
  B_CALL _ClrLCDFull  

  ld hl,0  
  ld (curCol), hl
    
  ld hl,LoseTxt  
    
  B_CALL _PutS  
    
  B_CALL _GetKey  
  B_CALL _ClrLCDFull  
  ret  

LoseTxt:  
  .db "LOSE",0    
    
Win:  
  B_CALL _ClrLCDFull 

  ld hl,0  
  ld (curCol), hl
    
  ld hl,WinTxt

  B_CALL _PutS
  B_CALL _GetKey
  B_CALL _ClrLCDFull
  ret
WinTxt:
  .db "WIN",0
Welcome:
  .db "Press ",$C1,"ENTER]",0

If you run it, it asks you to press [ENTER], if you do, you win, if you don't, well you lose The Game.

My first question is how to make Axe-like loops in Asm? In Axe, I'd do something like Repeat getKey(15). How would I do that in Assembly?

Code: [Select]

TitleScreen:
 ;Title Screen code
Loop:
 ;Code
 cp kClear
 jr z, TitleScreen
 jr Loop

I thought of this, but I can't test it right now. Thanks

<Edit>
I actually tried this and it looped forever, freezing my calc:

Code: [Select]

Start:
  cp kClear
  jr z, End
  jr Start
End:
  ret

I'm pretty sure I'm doing something wrong, but I'm a bit rusty at z80 asm.

Ashbad · « **Reply #1 on:** May 13, 2011, 03:47:50 pm »

well, some simple loops:

for statement --

Code: [Select]

   LD B, number_of_loops
@
   ; code
   DJNZ {-1@}
@

Your getkey loop:

Code: [Select]

@
   BCALL(GetKey)
   CP kClear
   JP NZ, {-1@}
@

Munchor · « **Reply #2 on:** May 13, 2011, 04:11:11 pm »

Oh my how stupid, I forgot about B_CALL (_GetKey).

Thanks a lot for reminding me of that, this worked:

Code: [Select]

Start:
  B_CALL (_GetKey)
  cp kClear
  jr z, End
  jr Start
End:
  ret

I have a very big problem now, I know how to display images using iPutSprite, but I wanted to make a cursor. My problem was clearing the screen in the end of the loop (it wiped out some registers).

lookitsan00b · « **Reply #3 on:** May 13, 2011, 04:55:10 pm »

Actually, if you want something similar to getkey(15), you might want:

Code: [Select]

jr loop_Condition
loop:
 ;code
loop_Condition:
 b_call(getCSC) ;getCSC doesn't wait for a key to be pressed, _GetKey will.
 cp 15             ;Im not sure what the equate is called, prolly skClear
 jr nz,loop

As for wiping out registers, push and pop really help

Munchor · « **Reply #4 on:** May 13, 2011, 04:57:48 pm »

Quote from: lookitsan00b on May 13, 2011, 04:55:10 pm

Actually, if you want something similar to getkey(15), you might want:
Code: [Select]
jr loop_Condition loop: ;code loop_Condition: b_call(getCSC) ;getCSC doesn't wait for a key to be pressed, _GetKey will. cp 15 ;Im not sure what the equate is called, prolly skClear jr nz,loop
As for wiping out registers, push and pop really help

I guess that is indeed better. Also, kClear works for me.

Thanks to the getCSC bcall trick I think I can now make my cursor program.

Munchor · « **Reply #5 on:** May 14, 2011, 04:30:09 am »

Here's what I did:

Code: [Select]

Start:
  B_CALL (_ClrLCDFull)
Loop:
  B_CALL (_GetKey)
  cp kClear
  jr z,End
  kr Loop
End:
  ret

So this will wait a for a [CLEAR] press and then close the loop.

I tried changing it to this:

Code: [Select]

Start:
  B_CALL (_ClrLCDFull)
Loop:
  B_CALL (_GetCSC)          ;The change is done here
  cp kClear
  jr z,End
  kr Loop
End:
  ret

And it freezes the calculator. Am I not using GetCSC the right way?

Deep Toaster · « **Reply #6 on:** May 14, 2011, 09:41:07 am »

_GetCSC uses different key codes than _GetKey. You should check for skClear (15), not kClear (9).

Munchor · « **Reply #7 on:** May 15, 2011, 07:25:26 am »

I have a problem assembling now:

Code: [Select]

.nolist
#include "ti83plus.inc"
#include "dcs7.inc"
.list
   .org userMem-2
   .db $BB,$6D
Init:
  B_CALL (_ClrLCDFull)
  ld ix,MyImage          ;Image
  ld b,8                 ;Height
  ld a,0                 ;X
  ld l,0                 ;Y

  call iPutSprite
  call iFastCopy

Loop:
  B_CALL (_GetKey)
  cp kClear
  jr z,End
  jr Loop
  
MyImage:
  .db $FF,$81,$81,$81,$81,$81,$81,$FF
  
End:
  ret

That's my code, I'm trying to display an image, here's the output from the assembler:

Code: [Select]

----------------------------------
----- Assembling display1 for the TI-83/84 Plus...
Brass Z80 Assembler 1.0.4.11 - Ben Ryves 2005-2006
--------------------------------------------------
Assembling...
Error: Unsupported directive '.end:'. [zztemp.asm:27]
Pass 1 complete. (636ms).
Pass 1 failed, pass 2 therefore skipped.
Errors: 1, Warnings: 0.

I don't have any '.end' in my code

JosJuice · « **Reply #8 on:** May 15, 2011, 07:26:56 am »

Add an .end at the end.

Munchor · « **Reply #9 on:** May 15, 2011, 07:32:33 am »

This worked for me:

Code: [Select]

.nolist
#include "ti83plus.inc"
#include "dcs7.inc"
.list
   .org userMem-2
   .db $BB,$6D
Init:
  B_CALL (_ClrLCDFull)
  ld ix,MyImage          ;Image
  ld b,8                 ;Height
  ld a,0                 ;X
  ld l,0                 ;Y

  call iPutSprite        ;Display Image
  call iFastCopy         ;Put it in the bugger

  jr Loop

Loop:                    ;Waits for the user to press [CLEAR]
  B_CALL (_GetCSC)
  cp skClear
  ;jr z,End
  jr Loop
  
MyImage:
  .db $FF,$81,$81,$81,$81,$81,$81,$FF

Yes! I displayed an image! Now I'll try and make it move with the arrows.

<Edit>

I tried this to make the sprite move right when the user presses the right key:

Code: [Select]

Init:
  B_CALL (_ClrLCDFull)
  ld ix,MyImage          ;Image
  ld b,8                 ;Height
  ld a,0                 ;X
  ld l,0                 ;Y

  jr Loop

Loop:                    ;Waits for the user to press [CLEAR]
  B_CALL (_GetCSC)
  
  call iPutSprite        ;Display Image
  call iFastCopy         ;Put it in the bugger
  
  cp skRight
  call z,MoveRight
  
  jr Loop

MoveRight:
  inc l

MyImage:
  .db $FF,$81,$81,$81,$81,$81,$81,$FF

However, the sprite isn't even displayed in the right place, is it because GetCSC exterminates registers?

Deep Toaster · « **Reply #10 on:** May 15, 2011, 09:25:34 am »

It's actually because END is a reserved keyword in Brass. You used it as a label in your original code, and Brass got confused why it had a colon after it.

Munchor · « **Reply #11 on:** May 15, 2011, 09:32:08 am »

Ah thanks a lot Deep Thought, that explains it, Mimas didn't have that problem.

Code: [Select]

.nolist
#include "ti83plus.inc"
#include "dcs7.inc"
.list
   .org userMem-2
   .db $BB,$6D
Init:
  B_CALL (_ClrLCDFull)

Loop:                    ;Waits for the user to press [CLEAR]
  B_CALL (_GetCSC)
  
  ld b,8
  ld ix,MyImage
  ld l,0
  
  call iPutSprite        ;Display Image
  call iFastCopy         ;Put it in the bugger
  
  cp skRight
  call z,MoveRight

  B_CALL (_ClrLCDFull)
  
  jr Loop

MoveRight:
  inc a

MyImage:
  .db $FF,$81,$81,$81,$81,$81,$81,$FF

I tried this to display an image and make it move right when I press RIGHT. However, it has some problems.

I don't know what registers BCalls wipe out, where can I find such info?

Either way, when I press [CLEAR] with that code weird stuff happens.

Any ideas, I'm trying to make a sort of a cursor.

Deep Toaster · « **Reply #12 on:** May 15, 2011, 09:39:29 am »

Quote from: Scout on May 15, 2011, 09:32:08 am

Ah thanks a lot Deep Thought, that explains it, Mimas didn't have that problem.

Blame TASM. They required the line ".end", then a newline, just to know that the file is done. Brass reserved "end" as a keyword for compatibility.

Quote from: Scout on May 15, 2011, 09:32:08 am

I don't know what registers BCalls wipe out, where can I find such info?

Either way, when I press [CLEAR] with that code weird stuff happens.

Pretty much everything you need is on WikiTI. Just find the bcall and look up "Destroys".

And if you're ever too lazy to check, just assume it destroys everything. That's what a lot of them do, anyway. Plus it avoids issues where TI releases a new OS where a certain bcall uses more registers than before, and now you gotta rewrite the whole thing.

Quote from: Scout on May 15, 2011, 09:32:08 am

Any ideas, I'm trying to make a sort of a cursor.

Have you tried the DCS libs? It makes graphical stuff like that a ton easier.

Munchor · « **Reply #13 on:** May 15, 2011, 09:42:07 am »

I am using DCS Libs, iPutSprite and iFastCopy, but those are more like Ion.

Thanks a lot for WikiTI link I had forgotten about it.

I will take a look at more graphical functions of DCS Libs then.

I want a cursor, but not DCS's by the way, also:

Code: [Select]

B_CALL _ClrLCDFull

Destroys
All

xD

Deep Toaster · « **Reply #14 on:** May 15, 2011, 09:47:06 am »

Quote from: Scout on May 15, 2011, 09:42:07 am

Code: [Select]
B_CALL _ClrLCDFull Destroys All
xD

A lot of them do that. Even ones you'd expect to be saved (for whatever reason) often get destroyed. Like _DispHL: what it does is display the value of HL in decimal on the screen. You'd expect it to keep HL intact, so you can keep working on it, but it doesn't. It destroys everything except BC.

Author Topic: David's Z80 Assembly Questions (Read 17131 times)

Munchor

David's Z80 Assembly Questions

Ashbad

Re: David's Z80 Assembly Questions

Munchor

Re: David's Z80 Assembly Questions

lookitsan00b

Re: David's Z80 Assembly Questions

Munchor

Re: David's Z80 Assembly Questions

Munchor

Re: David's Z80 Assembly Questions

Deep Toaster

Re: David's Z80 Assembly Questions

Munchor

Re: David's Z80 Assembly Questions

JosJuice

Re: David's Z80 Assembly Questions

Munchor

Re: David's Z80 Assembly Questions

Deep Toaster

Re: David's Z80 Assembly Questions

Munchor

Re: David's Z80 Assembly Questions

Deep Toaster

Re: David's Z80 Assembly Questions

Munchor

Re: David's Z80 Assembly Questions

Deep Toaster

Re: David's Z80 Assembly Questions