Author Topic: pimath begins learning z80 assembly - the questions thread (Read 3294 times)

pimathbrainiac · « **on:** March 07, 2015, 09:55:48 pm »

So I began working on z80 assembly a while ago, and failed. This time, I'm going to do it right. This is my questions/learning thread (which will be cross-posted to the other sites).

My setup:
Assembler: spasm-ng
Editor: Notepad++
Tutorial: http://media.taricorp.net/83pa28d/lesson/toc.html
Plans: I'm going to write a small game I call "World of Code." It will probably just end up being an RPG movement engine and end up stalling, knowing myself. If it turns into a thing, I'll post about it.

Sorunome · « **Reply #1 on:** March 08, 2015, 05:23:03 am »

I'd rather recommend using brass as an assembler, you can still use that exact tutorial.
http://www.benryves.com/bin/brass/

chickendude · « **Reply #2 on:** March 08, 2015, 11:18:36 am »

I prefer spasm, personally. Anyway, if you've got any questions ask away. I've been wanting to work on a general z80 games programming guide for a while, so maybe i can get a better idea of what people find difficult

chickendude · « **Reply #3 on:** March 13, 2015, 09:40:55 am »

So... pimath, are you an asm guru yet? Ask us some questions!

Geekboy1011 · « **Reply #4 on:** March 13, 2015, 07:37:03 pm »

Quote from: chickendude on March 13, 2015, 09:40:55 am

So... pimath, are you an asm guru yet? Ask us some questions!

This so hard! Seriously bro come at us!

Author Topic: pimath begins learning z80 assembly - the questions thread (Read 3294 times)

pimathbrainiac

pimath begins learning z80 assembly - the questions thread

Sorunome

Re: pimath begins learning z80 assembly - the questions thread

chickendude

Re: pimath begins learning z80 assembly - the questions thread

chickendude

Re: pimath begins learning z80 assembly - the questions thread

Geekboy1011

Re: pimath begins learning z80 assembly - the questions thread