Author Topic: AXE midi out adapter (Read 9064 times)

Keoni29 · « **Reply #15 on:** November 12, 2011, 04:55:11 pm »

Quote from: epic7 on November 12, 2011, 04:34:32 pm

Does it need a special midi cord or something?

No, but you gotta build a small piece of hardware. You need a 1k, 220 and 800 ohm resistor, a 9v battery, a midi socket,a 2.5mm plug socket and a pnp transistor

Quote from: Juju on November 12, 2011, 04:47:45 pm

Sounds awesome. I have an Arduino, I might try it. Or even help.

No arduinos involved, but thank you for the offer.

Keoni29 · « **Reply #16 on:** November 13, 2011, 07:48:04 am »

It doesn't work. I will check the signal with a digital osciloscope.

Edit: I think it's the hardware. I don't have a clue

Every site tells me to do it differently

Jim Bauwens · « **Reply #17 on:** November 13, 2011, 09:39:40 am »

Maybe the signal polarity is wrong (reversed), you could check that again.

Keoni29 · « **Reply #18 on:** November 13, 2011, 10:16:03 am »

Nope I know what's wrong! Midi parameters are 7 bits instead of 8 bits!
The first parameter (command and channel) is 8-bits, but the following two are supposed to be 7 bits long!

Author Topic: AXE midi out adapter (Read 9064 times)

Keoni29

Re: AXE midi out adapter

Keoni29

Re: AXE midi out adapter

Jim Bauwens

Re: AXE midi out adapter

Keoni29

Re: AXE midi out adapter