Author Topic: [Help please] Mode 7. (Read 7896 times)

Quigibo · « **Reply #15 on:** December 25, 2010, 07:54:51 pm »

:For(A,0,20)
:A*B->C
:End

Can be changed to:

Code: [Select]

:-B->A
:For(D,0,20)
:A+B->A->C
:End

And now you've removed a multiplication. If you add rotation, you have to do 2 additions: one for the Y spacing and one for the X spacing.

Happybobjr · « **Reply #16 on:** December 25, 2010, 08:06:00 pm »

thanks i'll look into that.

jnesselr · « **Reply #17 on:** December 25, 2010, 08:08:41 pm »

@Quigibo: I don't fully understand the concept behind what you are doing. Can you explain it?

Happybobjr · « **Reply #18 on:** December 25, 2010, 08:10:00 pm »

Quote from: Quigibo on December 25, 2010, 07:54:51 pm

Code: [Select]
:For(A,0,20) :A*B->C :End
Can be changed to:
Code: [Select]
:-B->A :For(D,0,20) :A+B->A->C :End
And now you've removed a multiplication. If you add rotation, you have to do 2 additions: one for the Y spacing and one for the X spacing.

that isn't in the code you linked to.

yunhua98 · « **Reply #19 on:** December 27, 2010, 11:42:49 pm »

thanks, but to make sure I'm understanding correctly, could someone make a pic like calc84maniac's and label the d1, d2, r1, and r2?
I'm still a bit confused... I just can't picture things in 3D.

Happybobjr · « **Reply #20 on:** December 28, 2010, 09:16:20 am »

do what i did.
Take quigibo's mode 7 code.
in your program only draw to L3.
put in quigibo's code right where you would normally have display gragh.
note: change all Y's in quigibo's code to (20-y). (maybe 30-y i can't remember and don't have my calc near me.)

Then you can fiddle around with his code to understand it.

Author Topic: [Help please] Mode 7. (Read 7896 times)

Quigibo

Re: [Help please] Mode 7.

Happybobjr

Re: [Help please] Mode 7.

jnesselr

Re: [Help please] Mode 7.

Happybobjr

Re: [Help please] Mode 7.

yunhua98

Re: [Help please] Mode 7.

Happybobjr

Re: [Help please] Mode 7.