0 Members and 1 Guest are viewing this topic.
Press and hold DEL. While holding Del, put the battery back in. It should say it's waiting for an OS.At this point try re-sending the OS using TiLP or TI-connect.
Edit: Try first thepenguins advice, as he knows what he is talking about
Yeah, mode + battery won't run if you still have an OS on the calculator. So...1. Start an OS transfer2. Pull out the cable half way though3. Pull out a battery4. Wait a few seconds5. Put it in while holding MODE6. Press ON until you are at the flash test7. Let the flash test finish.8. Press ON a few times to get through the rest of the tests9. Send an OS
PROGRAM:A:.B:GetCalc("appvAxeData"):"->GDB1:Pt-On(1,1,GDB1:DispGraph:repeat getKey(15):End
PROGRAM:A:.B:GetCalc("appvAzeData"):"->Pic10:Pt-On(1,1,Pic10:DispGraph:repeat getKey(15):End