Author Topic: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files (Read 58439 times)

cyanophycean314 · « **Reply #120 on:** August 29, 2012, 09:22:51 pm »

The easiest way to use luna is go to command line (I'm assuming you use Windows) and go to the directory of luna. You probably should also put your lua source there too. Then type
"luna.exe <filename>.lua <filename>.tns"

I use a .bat for speed. My code looks like

Code: [Select]

cd C:\Graphing Calculator\Nspire\Lua Programming\luna-v0.2b
luna.exe jumper.lua jumper.tns

I usually work on one project at a time, so it's faster just clicking on an icon.

blfngl · « **Reply #121 on:** August 29, 2012, 09:28:08 pm »

Thank you good sir

Mr-Kitty · « **Reply #122 on:** January 27, 2013, 02:01:33 pm »

For those of you who are on OS X and are having trouble building Luna, I found out why it won't build. In the Luna's readme, it states you need gcc >=4.5, but apple's gcc is gcc 4.2. Using MacPorts (or Homebrew, Fink), install gcc 4.7 (run "sudo port install gcc47"). Then open up Luna's Makefile with a text editor and change any instances of "gcc" to "/opt/local/bin/gcc-mp-4.7". Cd to the Luna directory in Terminal, and do make "dist luna", and it builds!

Code: [Select]

CC:=/opt/local/bin/gcc-mp-4.7
CFLAGS:=-W -Wall -m32
LDFLAGS:= -lssl -lz -m32
VPATH := minizip-1.1

OS ?= `uname -s`
ifeq ($(OS),Windows_NT)
  EXEEXT = .exe
else
	CFLAGS := $(CFLAGS) -DUSE_FILE32API
	LDFLAGS:= $(LDFLAGS) -lcrypto
endif

all: luna$(EXEEXT)

luna$(EXEEXT): luna.o zip.o ioapi.o
	/opt/local/bin/gcc-mp-4.7 -o $@ $^ $(LDFLAGS)

dist: clean all
	mkdir -p dist/src
	rm -f *.o
	find . -maxdepth 1 ! -name 'luna$(EXEEXT)' -a ! -name dist -a ! -name . -exec cp -r {} dist/src \;
	cp luna$(EXEEXT) *.dll *.txt dist

clean:
	rm -rf *.o luna$(EXEEXT) dist

Also, link for those who don't want to build themselves:
https://dl.dropbox.com/u/4657389/luna-v3.0a-osx-intel.zip

Jim Bauwens · « **Reply #123 on:** January 27, 2013, 07:19:45 pm »

Quote from: Mr-Kitty on January 27, 2013, 02:01:33 pm

For those of you who are on OS X and are having trouble building Luna, I found out why it won't build. In the Luna's readme, it states you need gcc >=4.5, but apple's gcc is gcc 4.2. Using MacPorts (or Homebrew, Fink), install gcc 4.7 (run "sudo port install gcc47"). Then open up Luna's Makefile with a text editor and change any instances of "gcc" to "/opt/local/bin/gcc-mp-4.7". Cd to the Luna directory in Terminal, and do make "dist luna", and it builds!

Code: [Select]
CC:=/opt/local/bin/gcc-mp-4.7 CFLAGS:=-W -Wall -m32 LDFLAGS:= -lssl -lz -m32 VPATH := minizip-1.1 OS ?= `uname -s` ifeq ($(OS),Windows_NT) EXEEXT = .exe else CFLAGS := $(CFLAGS) -DUSE_FILE32API LDFLAGS:= $(LDFLAGS) -lcrypto endif all: luna$(EXEEXT) luna$(EXEEXT): luna.o zip.o ioapi.o /opt/local/bin/gcc-mp-4.7 -o $@ $^ $(LDFLAGS) dist: clean all mkdir -p dist/src rm -f *.o find . -maxdepth 1 ! -name 'luna$(EXEEXT)' -a ! -name dist -a ! -name . -exec cp -r {} dist/src \; cp luna$(EXEEXT) *.dll *.txt dist clean: rm -rf *.o luna$(EXEEXT) dist
Also, link for those who don't want to build themselves:
https://dl.dropbox.com/u/4657389/luna-v3.0a-osx-intel.zip

Thanks for sharing, I'm sure this will help several members

Lionel Debroux · « **Reply #124 on:** January 28, 2013, 01:32:47 am »

Alternatively, using clang, if you have that installed, should work. Works for me under Linux.

(I tried to post this yesterday evening, but my session timed out and I didn't notice)

Mr-Kitty · « **Reply #125 on:** February 18, 2013, 09:17:27 pm »

Quote from: Lionel Debroux on January 28, 2013, 01:32:47 am

Alternatively, using clang, if you have that installed, should work. Works for me under Linux.

(I tried to post this yesterday evening, but my session timed out and I didn't notice)

Just tried it, can confirm it works. Replace all instances of "gcc" with "clang" (Obviously clang has to be installed, not sure if it is by default(Edit: It comes with the Xcode command line tools))

Spoiler For build with clang Makefile:

Code: [Select]

CC:=clang
CFLAGS:=-W -Wall -m32
LDFLAGS:= -lssl -lz -m32
VPATH := minizip-1.1

OS ?= `uname -s`
ifeq ($(OS),Windows_NT)
  EXEEXT = .exe
else
	CFLAGS := $(CFLAGS) -DUSE_FILE32API
	LDFLAGS:= $(LDFLAGS) -lcrypto
endif

all: luna$(EXEEXT)

luna$(EXEEXT): luna.o zip.o ioapi.o
	clang -o $@ $^ $(LDFLAGS)

dist: clean all
	mkdir -p dist/src
	rm -f *.o
	find . -maxdepth 1 ! -name 'luna$(EXEEXT)' -a ! -name dist -a ! -name . -exec cp -r {} dist/src \;
	cp luna$(EXEEXT) *.dll *.txt dist

clean:
	rm -rf *.o luna$(EXEEXT) dist

ajorians · « **Reply #126 on:** February 26, 2013, 09:32:06 am »

Hi guys!

First I think this program is really cool! I find it amazing how much you all figured out about this file format!

If I may; I modified the source code a little to add the ability to extract the Problem1.xml out of the .tns file (though it ONLY works with the luna created .tns files).

So for what it is worth here are the source files: https://dl.dropbox.com/s/jh6nww60fha4tb2/luna_src.zip

After you build it you can do this (example in Linux):
./luna pong.lua pong.tns #Can already do this in current luna
./luna pong.tns #Lists files in the tns file
./luna pong.tns Problem1.xml #Extracts Problem1.xml out and saves it as Problem1.xml

Since extracting only works with the luna created .tns file; that unfortunately means if you take the "hello world" XML from http://ndlessly.wordpress.com/2011/09/19/luna-updated-for-third-party-tns-document-generation/ and construct a .tns file out of it and then on the calculator immediately save it; this program is no longer able to extract the Problem1.xml out of it!

I figure this is a good step! My change was done with full admiration and respect to everyone's work before mine.

My motivation is it would be cool if nTxt could read/write Note files. As well as for me I'd think I'd like to make a calculator game, for instance, that would use note file(s) for the levels sets, high score table, config, etc. So instead of the level sets being some sort of file with the extension being .tns that are sent to the calculator; have them be note files that a user could edit. I know this is unnecessary because a user can already use nTxt to edit files.

At any rate I learned more about tns files!

Lionel Debroux · « **Reply #127 on:** February 26, 2013, 01:24:09 pm »

Welcome. We saw your programs on ticalc.org, but it seems to be the first time you're joining a community actively

ajorians · « **Reply #128 on:** February 26, 2013, 04:01:03 pm »

Thanks Lionel!

That was my first Omnimaga post! I very much would like to make some amazing things for these devices! As well as take a more active part in this community! I'm glad you like my programs! I intend on making more (and more comprehensive ones too)!

DJ Omnimaga · « **Reply #129 on:** February 26, 2013, 04:06:56 pm »

Heya and welcome here, I hope you enjoy your stay. Also thanks for this update.

I only saw your aquarium program so far but didn't have time to check the others, because Ticalc.org server is so slow lately (it takes around 30 seconds to load every page). What are your future plans in terms of programs?

EDIT: Wow you joined ticalc.org in 1997?

(Your ID has 3 digits)

ajorians · « **Reply #130 on:** February 27, 2013, 07:56:29 am »

Hey DJ_O,

My future plans of programs on the calculator will be for the TI-nSpire (because of color screen, memory, processor speed)! In the short run I'll create single player games (some puzzle games, etc)! In the long run I hope to make multiplayer games that you can play against A.I.s or another player via the link cable! Such as Battleship, Hearts, Ticket to Ride, etc. I've made a long that if anybody else wanted to make the same game I'd happily move onto another program.

Oh I always had a fascination with calculators (grew up without video game systems or computer)! I should probably explain in detail on another topic about myself than this one. But as a tech enthusiast the calculator (TI-83 at the time) was the coolest piece of technology I had! I loved seeing the updates on ticalc.org (and others) and will always be a calculator hobbyist!

DJ Omnimaga · « **Reply #131 on:** March 05, 2013, 04:01:43 pm »

This is cool to hear

. I myself haven't programmed calcs from July 2010 until January 2013, when I somehow got a slightly renewed interest in pure-BASIC with the impending release of the 84+C Silver Edition, but I started in July 2001 then started posting on forums around 2 years later. It's fun to see what people can do with these 6-15 MHz things, BASIC or ASM, especially since 2006 when many new tricks got discovered and compiled in wikis.

Can't wait to see new releases and updates from you

ajorians · « **Reply #132 on:** March 07, 2013, 06:18:24 pm »

Hey DJ_O,

Nice! I love how information has been easy to browse in wikis too!

I'll post, really soon, what I've been working on the last few days (as well as upcoming releases/updates)!

Have a great day!

Author Topic: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files (Read 58439 times)

cyanophycean314

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

blfngl

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

Mr-Kitty

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

Jim Bauwens

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

Lionel Debroux

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

Mr-Kitty

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

ajorians

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

Lionel Debroux

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

ajorians

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

DJ Omnimaga

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

ajorians

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

DJ Omnimaga

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files

ajorians

Re: "Luna" is here and converts your .lua files into 3.0.2-compatible .tns files