mViewer is an image reader for all TI-Nspire.
Unlike the OS, it lets you open images bigger than the screen, zoom in, zoom out, and scroll them.




The latest main improvements were TI-Nspire CX support and PNG images support thanks to a port of zlib and libPNG libraries for the TI-Nspire by JayTe.



mViewer CX 3.2 now includes a port of the libJPEG library for the TI-Nspire by myself, adding JPEG images support.

You can now open BMP, PNG and JPEG images.



There has also been speed improvements and many memory improvements which should help you opening bigger images on non-CX TI-Nspire which are limited in RAM (32MB SDRAM, allmost filled by the OS).






Source: http://tiplanet.org/forum/viewtopic.php?f=43&t=10171
Download: http://tiplanet.org/forum/archives_voir.php?id=6601

This is great news
However, this still need Ndless, right ? So calling it mViewer 3.2 is not a good idea in my opinion. People could think it runs on OS 3.2

Quote from: Hayleia on July 29, 2012, 02:14:46 am

This is great news
However, this still need Ndless, right ? So calling it mViewer 3.2 is not a good idea in my opinion. People could think it runs on OS 3.2

I understand the problem, but last version was 3.1...

Perhaps, until a version of ndless is released for 3.2, you could try something like 3.1x (so this might be "3.11")

Or you just add revisions, like Ndless. This would be mViewer CX 3.1 r1.
Now that I think of it, it is the same as Reo's solution but a bit more ugly -.-

mViewer CX updated to version 3.21.

- disabled double buffering on CX because of a side bug (flickering screen) when changing screen base address (don't worry: no speed issue)

- improved scrolling on zoomed in images

- improved touchpad reactivity, espacially on zoomed in images



If you have a touchpad, try this version - you're going to love it!



Download:
http://tiplanet.org/forum/archives_voir.php?id=6601

mViewer CX updated again to version 3.22, and this time I'm very happy with this one

Double buffering is back on the CX, and the flickering screen side bug which had bothered me for 6 months is now fixed.

Double buffering needs 2 16-bits screen buffers.
For one of them, we can take the default OS screen buffer.
But the other has to be (m)allocated...

And the PL111 screen controller from the CX only want the screen address to be set double-word-aligned (divisible by 8 ).
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0293c/I899134.html

So when malloc was returning addresses not divisible by 8, the screen address used by the hardware was the nearest lower number divisible by 8, so lower than the address known to mviewer, making the screen shift.


Download:
http://tiplanet.org/forum/archives_voir.php?id=6601



A similar bug might be present in nDoom on CX, as it uses an 8-bits screen buffer non-CX handhelds had to (m)allocate, which is useless on CX but I think I didn't make a CX-specific version of this line.

Looks good and quite handy!

wow, that is a pretty high quality