« previous next »
Pages: 1 ... 3 4 [5] 6   Go Down

Author Topic: The 1st step into CAS+ flashing  (Read 29755 times)

0 Members and 1 Guest are viewing this topic.

Offline critor

  • Editor
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2079
  • Rating: +439/-13
    • View Profile
    • TI-Planet
Re: The 1st step into CAS+ flashing
« Reply #60 on: March 23, 2011, 05:57:51 pm »
Here's the CAS+ inf file content:

Code: [Select]
;Texas Instruments Incorporated
;Driver Information File for TI-Nspire
;Copyright (c) Texas Instruments Inc. All rights reserved.

[Version]
Signature           = "$Windows NT$"
Class               = Net
ClassGUID           = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider            = %TI%
DriverVer           = 05/24/2006,5.2.3790.1454
CatalogFile         = tirndis.cat

[Manufacturer]
%TI%          = TIDevices,NT.5.1

[TIDevices]
%TIDevice%    = RNDIS, USB\VID_0451&PID_E011

[TIDevices.NT.5.1]
%TIDevice%    = RNDIS.NT.5.1, USB\VID_0451&PID_E011

[ControlFlags]
ExcludeFromSelect=*

; Windows 2000 specific sections ---------------------------------

[RNDIS.NT]
Characteristics = 0x84   ; NCF_PHYSICAL + NCF_HAS_UI
BusType         = 15
DriverVer       = 05/24/2006,5.2.3790.1454
AddReg          = RNDIS_AddReg_NT, RNDIS_AddReg_WIN2K_XP
CopyFiles       = RNDIS_CopyFiles_NT

; DO NOT MODIFY THE SERVICE NAME
[RNDIS.NT.Services]
AddService = USB_RNDISY, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog

[RNDIS_CopyFiles_NT]
; no rename of files on Windows 2000, use the 'y' names as is
usb8023y.sys, , , 0
rndismpy.sys, , , 0

[RNDIS_ServiceInst_NT]
DisplayName     = %ServiceDisplayName%
ServiceType     = 1
StartType       = 3
ErrorControl    = 1
ServiceBinary   = %12%\usb8023y.sys    
LoadOrderGroup  = NDIS
AddReg          = RNDIS_WMI_AddReg_NT

[RNDIS_WMI_AddReg_NT]
HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpy.sys"

; Windows XP specific sections -----------------------------------

[RNDIS.NT.5.1]
Characteristics = 0x84   ; NCF_PHYSICAL + NCF_HAS_UI
BusType         = 15
DriverVer       = 05/24/2006,5.2.3790.1454
AddReg          = RNDIS_AddReg_NT, RNDIS_AddReg_WIN2K_XP
; no copyfiles - the files are already in place

[RNDIS.NT.5.1.Services]
AddService      = USB_RNDIS, 2, RNDIS_ServiceInst_5_1, RNDIS_EventLog

[RNDIS_ServiceInst_5_1]
DisplayName     = %ServiceDisplayName%
ServiceType     = 1
StartType       = 3
ErrorControl    = 1
ServiceBinary   = %12%\usb8023.sys    
LoadOrderGroup  = NDIS
AddReg          = RNDIS_WMI_AddReg_5_1

[RNDIS_WMI_AddReg_5_1]
HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"

; Windows XP and Windows 2000 Sections

[RNDIS_AddReg_NT]
HKR, Ndi,               Service,        0, "USB_RNDISY"
HKR, Ndi\Interfaces,    UpperRange,     0, "ndis5_ip"
HKR, Ndi\Interfaces,    LowerRange,     0, "nolower"

[RNDIS_AddReg_WIN2K_XP]
HKR, NDI\params\NetworkAddress, ParamDesc,  0, %NetworkAddress%
HKR, NDI\params\NetworkAddress, type,       0, "edit"
HKR, NDI\params\NetworkAddress, LimitText,  0, "12"
HKR, NDI\params\NetworkAddress, UpperCase,  0, "1"
HKR, NDI\params\NetworkAddress, default,    0, " "
HKR, NDI\params\NetworkAddress, optional,   0, "1"
[RNDIS_EventLog]
AddReg = RNDIS_EventLog_AddReg

[RNDIS_EventLog_AddReg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7


[SourceDisksNames]
1=%SourceDisk%,,1

[SourceDisksFiles]
usb8023y.sys=1
rndismpy.sys=1

[DestinationDirs]
RNDIS_CopyFiles_NT    = 12

[Strings]
ServiceDisplayName    = "USB Remote NDIS Network Device Driver"
NetworkAddress        = "Network Address"
TI                    = "Texas Instruments Incorporated"
TIDevice              = "Texas Instruments Remote NDIS Network Device"
SourceDisk            = "TI USB Network Driver Install Disk"

Note that the date is posterior to my oldest orange-blue CAS+ boot1/boot2/OS build dates.
(the one on which I have the OS image in the documents folder, but which doesn't work with TI-Nspire Computer Link 1.0)


The oldest CAS+ DHCP server is sending 3 to 4 IP adresses to the TI virtual network interface on my computer, which is reqesting them.
But it seems that for some reason my computer is either not receiving those IPs, either not acknowledging them.

I've tried what you proposed: manually assigning the proposed IP.
But it doesn't work: "the IP is allready in use".
I've tried assigning another IP in the same subnet, but no other active IP was visible in the subnet.

Remember the CAS+ IP seems to be the interface IP plus one.
So it might be affected after the computer acknowledges.


And of course, I have no problems with more recent CAS+ DHCP servers.
« Last Edit: March 23, 2011, 06:10:52 pm by critor »
Logged
TI-Planet co-admin.

Offline Goplat

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 289
  • Rating: +82/-0
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #61 on: March 24, 2011, 08:02:26 pm »
I've found a buffer overflow vulnerability in the command shell's printf routine, which could potentially allow executing code by TYPEing a file. We may not be able to exploit it at this time because
- the code may have changed (the CAS+ has Reliance v2.00.0451/FlashFX v2.0, instead of Reliance v2.10.1150/FlashFX v3.00).
- the WRITE command can't create a file with 00, 08, 0A, or 0D bytes in it (this could be insurmountable, or not a problem at all, depending on what the addresses of the relevant functions and stack items turn out to be)
but I think it might be worth a try.

First step is to dump the stack to get some addresses... Try this (in whatever directory you're comfortable creating files in):

write stackdump 192
%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x
type stackdump
Logged
Numquam te deseram; numquam te deficiam; numquam circa curram et te desolabo
Numquam te plorare faciam; numquam valedicam; numquam mendacium dicam et te vulnerabo

Offline bsl

  • LV4 Regular (Next: 200)
  • ****
  • Posts: 157
  • Rating: +14/-0
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #62 on: March 25, 2011, 12:09:50 am »
I was just looking at that vulnerability.
I was trying:
AAAA%08x%08x%08x.....%08x
and hoping to get one of the "%08x" would give me 41414141 - then replace that with %s
to read arbitrary memory addresses - could not find it so far.
Seems this technique ignores %p, havent tried %n.

critor : for a quick test try:
c:\>write test.tns 19
c:\>AAAA,%08x,%08x,%08x  <RETURN>
c:\>type test.tns
EDIT: If this format string is in the stack on the CAS+ instead of a buffer like the later models, then this looks more promising.
« Last Edit: March 25, 2011, 12:56:44 am by bsl »
Logged

Offline critor

  • Editor
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2079
  • Rating: +439/-13
    • View Profile
    • TI-Planet
Re: The 1st step into CAS+ flashing
« Reply #63 on: March 25, 2011, 02:18:37 pm »
Quote from: bsl on March 25, 2011, 12:09:50 am
critor : for a quick test try:
c:\>write test.tns 19
c:\>AAAA,%08x,%08x,%08x  <RETURN>
c:\>type test.tns

Code: [Select]
C:\documents\ndless\>write test.tns 19
AAAA,%08x,%08x,%08x
C:\documents\ndless\>dir

1980-01-01 00:00:00     <Dir> .
1980-01-01 00:00:00     <Dir> ..
1980-01-01 00:00:00    639280 os.tns
1980-01-01 00:00:00        19 test.tns

Free Space: 17480192 bytes


C:\documents\ndless\>type test.tns
AAAA,20000013,106F259B,00000000
C:\documents\ndless\>
Logged
TI-Planet co-admin.

Offline critor

  • Editor
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2079
  • Rating: +439/-13
    • View Profile
    • TI-Planet
Re: The 1st step into CAS+ flashing
« Reply #64 on: March 25, 2011, 02:26:45 pm »
And here's the other test!


Quote from: Goplat on March 24, 2011, 08:02:26 pm
First step is to dump the stack to get some addresses... Try this (in whatever directory you're comfortable creating files in):

write stackdump 192
%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x
type stackdump

Code: [Select]
C:\documents\ndless\>write stackdump.tns 192
%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8
x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%
8x%8x%8x%8x%8x%8x%8x%8x%8x%8x%8x
C:\documents\ndless\>dir

1980-01-01 00:00:00     <Dir> .
1980-01-01 00:00:00     <Dir> ..
1980-01-01 00:00:00    639280 os.tns
1980-01-01 00:00:00        19 test.tns
1980-01-01 00:00:00       192 stackdump.tns

Free Space: 17479680 bytes


C:\documents\ndless\>type stackdump.tns
20000013106F2648       010919DA0       0      C0       010919DB4       210919E48
10919DAC101A923C101A9C7C1091A490       0106F2188106F218D106F219C       01091A3A0
      3B10919DF810919DDC101AC3A4101F1B2410917E841091A3A81091A3A0      3B10919E10
10919DFC1091A3A8FFFFFFFF106A1CB41091A3C710919E3010919E14101A93041014BA38       0
1091A3A8101AA97C106A1CA810919E4810919E34101AA70C       2       1106FB5C010919E60
10919E4C10000994101A9194       0       010919E7810919E64101279841000097C10000040
10917E8410919E7C10919E7C       0
C:\documents\ndless\>
Logged
TI-Planet co-admin.

Offline Goplat

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 289
  • Rating: +82/-0
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #65 on: March 25, 2011, 04:05:34 pm »
As I feared, looks like the command shell code is different (and unlike the later version, the address of RelDclVPrintf doesn't show up in uninitialized space in the TYPE command's stack frame). Without knowing the addresses of any useful functions we can't exploit the buffer overflow safely yet. :( We had better wait for another CAS+ OS to be dumped, so we can see the older command shell code, and come back to this then.
Logged
Numquam te deseram; numquam te deficiam; numquam circa curram et te desolabo
Numquam te plorare faciam; numquam valedicam; numquam mendacium dicam et te vulnerabo

Offline mikehill2003

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 279
  • Rating: +13/-4
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #66 on: March 25, 2011, 04:08:31 pm »
Quote from: Goplat on March 25, 2011, 04:05:34 pm
As I feared, looks like the command shell code is different (and unlike the later version, the address of RelDclVPrintf doesn't show up in uninitialized space in the TYPE command's stack frame). Without knowing the addresses of any useful functions we can't exploit the buffer overflow safely yet. :( We had better wait for another CAS+ OS to be dumped, so we can see the older command shell code, and come back to this then.

What's the best way to dump the OS?
Logged

Offline critor

  • Editor
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2079
  • Rating: +439/-13
    • View Profile
    • TI-Planet
Re: The 1st step into CAS+ flashing
« Reply #67 on: March 25, 2011, 04:15:47 pm »
Quote from: mikehill2003 on March 25, 2011, 04:08:31 pm
Quote from: Goplat on March 25, 2011, 04:05:34 pm
As I feared, looks like the command shell code is different (and unlike the later version, the address of RelDclVPrintf doesn't show up in uninitialized space in the TYPE command's stack frame). Without knowing the addresses of any useful functions we can't exploit the buffer overflow safely yet. :( We had better wait for another CAS+ OS to be dumped, so we can see the older command shell code, and come back to this then.

What's the best way to dump the OS?


As far as we know up to now, the production CAS+ OS can only be dumped by connecting the NAND ROM chip to a reader...

TI-Nspire Computer Link 1.0 does only access a virtual drive content...
And it seems we can't run the DataLight shell to access the physical drive content without assembly...


But once the production OS is dumped, me may be able to dump other CAS+ OSes easier through some exploits.


Note the Ndless 1.7 installer exploit does freeze the CAS+ OS.
(calculator can still be turned off/on and the pointer can still be moved through the joypad, but that's all)
« Last Edit: March 25, 2011, 04:21:27 pm by critor »
Logged
TI-Planet co-admin.

Offline bsl

  • LV4 Regular (Next: 200)
  • ****
  • Posts: 157
  • Rating: +14/-0
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #68 on: March 25, 2011, 10:17:27 pm »
Try:
type /phoenix/policy.dat

Maybe changing something in this file is all that is needed !!!!!

EDIT: re-naming this file to policy.back :
Code: [Select]
copy policy.dat policy.back
del policy.dat
, may enable USB, and other features.
« Last Edit: March 26, 2011, 11:35:13 am by bsl »
Logged

Offline Goplat

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 289
  • Rating: +82/-0
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #69 on: March 26, 2011, 02:32:25 pm »
Are you completely sure of what policy.dat does? I don't think we should risk the possibility that the OS won't boot without it. This is the only known copy of this OS in the world.
« Last Edit: March 26, 2011, 02:39:39 pm by Goplat »
Logged
Numquam te deseram; numquam te deficiam; numquam circa curram et te desolabo
Numquam te plorare faciam; numquam valedicam; numquam mendacium dicam et te vulnerabo

Offline critor

  • Editor
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2079
  • Rating: +439/-13
    • View Profile
    • TI-Planet
Re: The 1st step into CAS+ flashing
« Reply #70 on: March 26, 2011, 04:04:52 pm »
Anyway, there seems to be no "policy.dat" file on the oldest 1.0.3xx OS.

Code: [Select]
C:\phoenix\>type policy.dat

Error = -1
« Last Edit: March 26, 2011, 04:05:08 pm by critor »
Logged
TI-Planet co-admin.

Offline critor

  • Editor
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2079
  • Rating: +439/-13
    • View Profile
    • TI-Planet
Re: The 1st step into CAS+ flashing
« Reply #71 on: March 26, 2011, 04:11:43 pm »
By the way, when I connect a more recent CAS+, I get a much smaller DHCP log:

Code: [Select]
pn-srv6-1217: sent reply 2, len=281, to 172.16.80.65:68
pn-srv6-1217: sent reply 5, len=281, to 172.16.80.65:68
Logged
TI-Planet co-admin.

Offline critor

  • Editor
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2079
  • Rating: +439/-13
    • View Profile
    • TI-Planet
Re: The 1st step into CAS+ flashing
« Reply #72 on: April 03, 2011, 12:43:27 pm »
Let's talk about the CAS+ DHCP server again.

When I connect the old blue-orange CAS+, I get:
Code: [Select]
pn-srv6-701: request type 1
pn-srv6-821: ready to reply(hh=4, sz=281), typ=2, to port 68
pn-srv6-838: sent reply 2, len=281, to port 68
pn-srv6-701: request type 1
pn-srv6-1073: bound dhcp-ans [172.16.177.46:68] to 8
pn-srv6-821: ready to reply(hh=8, sz=281), typ=2, to port 68
pn-srv6-838: sent reply 2, len=281, to port 68
pn-srv6-701: request type 1
pn-srv6-821: ready to reply(hh=8, sz=281), typ=2, to port 68
pn-srv6-838: sent reply 2, len=281, to port 68
pn-srv6-701: request type 1
pn-srv6-821: ready to reply(hh=8, sz=281), typ=2, to port 68
pn-srv6-838: sent reply 2, len=281, to port 68
pn-srv6-701: request type 1
pn-srv6-821: ready to reply(hh=8, sz=281), typ=2, to port 68
pn-srv6-838: sent reply 2, len=281, to port 68
pn-srv6-701: request type 1
pn-srv6-1073: bound dhcp-ans [172.16.50.34:68] to 9
pn-srv6-821: ready to reply(hh=9, sz=281), typ=2, to port 68
pn-srv6-838: sent reply 2, len=281, to port 68The CAS+ RNIS interface doesn't get a valid IP and I cannot send/receive files.

When I connect a more recent CAS+, I get:
Code: [Select]
pn-srv6-1217: sent reply 2, len=281, to 172.16.80.65:68
pn-srv6-1217: sent reply 5, len=281, to 172.16.80.65:68The CAS+ RNIS interface does get a valid IP immediatly and I can send/receive files.


Has somebody a good knowledge of the DHCP protocol, and of what could be wrong in the 1st log?

In the 1st log, after "sent reply 2", I just get "request type 1" again...
As if the sent IP was not accepted/understood by the computer, which is just asking again...


Do you know of any way of logging what is sent/received by an IP-less interface?
« Last Edit: April 03, 2011, 12:47:49 pm by critor »
Logged
TI-Planet co-admin.

Offline perennial

  • LV1 Newcomer (Next: 20)
  • *
  • Posts: 14
  • Rating: +2/-0
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #73 on: July 31, 2011, 12:13:29 am »
Goplat, if you want to experiment some more with the CAS+, I can send you the CAS+ calculator (experiment however you like until you are satisfied then you can send it back) also with the TI-Nspire broken ribbon(keep). Please let me know if you are interested.
(I keep deleting and posted again to get your attention.) Don't mean to spam.
« Last Edit: July 31, 2011, 12:14:39 am by perennial »
Logged

Offline Goplat

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 289
  • Rating: +82/-0
    • View Profile
Re: The 1st step into CAS+ flashing
« Reply #74 on: July 31, 2011, 12:34:53 am »
Thanks for the offer, but there isn't anything I could do with a CAS+; I don't know of any way to run code on it.
Regarding the other calc, I am not a hardware guy; I can't fix a broken ribbon cable (and I already have a TI-Nspire anyway).
Logged
Numquam te deseram; numquam te deficiam; numquam circa curram et te desolabo
Numquam te plorare faciam; numquam valedicam; numquam mendacium dicam et te vulnerabo
Pages: 1 ... 3 4 [5] 6   Go Up
« previous next »