0 Members and 1 Guest are viewing this topic.
ExtendeD worked a bit on the J04 connector in commercial models, indeed. But no JTAG (in standard format) seemed to be available.
Quote from: Lionel Debroux on March 24, 2011, 02:31:35 amExtendeD worked a bit on the J04 connector in commercial models, indeed. But no JTAG (in standard format) seemed to be available.So is a NAND reader our best chance right now?
So is a NAND reader our best chance right now?
If I were to buy a CAS+ on ebay, which is the OS version it would most likely come with?
Yep, and it had remnants of external printer support
The standard trick in soldering microelectronics with a high wattage iron is towrap a thin copper wire on the tip of your soldering iron, to make a smallhot contact.Make it long enough , then cut pieces of the wire shorter and shorter, till its hot enoughto melt the solder.A solder sucker is the preferred way to eliminate the solder from the nand-board bond.Update: Check your local electronics hobby store for desoldering tools also.(mention for microelectronics) There are inexpensive tools I found at my store [Radio Shack ]. Is Radio Shack in France ?