Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Ineedthehelp

Pages: 1 2 [3]
31
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 27, 2013, 03:14:24 pm »
Wait so this is what I did so far
Steps:
0) backed up my files
1) I have the 3.1.0.file so far on my CX
2) I tnoced the cas file and renamed to phoenix.tns
3) I made a new file called nlaunch and when I drop my.tns it upgrades my is or says that on top and LOOKS identical to how you upgrade your osI did rename the file  but it doesn't work. And how do you unchecked the box I followed the directions by renaming it but that's what it does




32
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 27, 2013, 02:40:51 pm »
But when I move phoenix it upgrades or it looks exactly like it is that normal? Like as soon as I place it in the nlaunch folder I made it does the upgrade looking thing

33
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 27, 2013, 02:09:30 pm »
What is the ti  software called? 

Because I am using the ti computer link software. When I go  in it asks me if I want to upgrade my calculator and I press no then when I drop my phoenix into nlaunch the folder I made under my documents it said upgrading is and has the same procedure as you would when you upgrade your is. So I am just scared it might upgrade my os.

34
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 27, 2013, 01:33:22 pm »
I will try both( as in tnoc the file and change the extension)  but for the TiLP where is the download link for the program or something I just see a description.

 Edit: Could you send me the link that downloads the TiLP so I can download it with just clicking the link?
 Edit: if that wasn't a program and I have to use windows installer for it how do I approach that sorry I am such a noob. So basically how do I use windows installer for tilp? I am not sure how and what you mean by that.

35
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 27, 2013, 01:22:32 pm »
So when you say remove boot 2 and examples are you talking about the CAS file?
I am not sure where my file extension option is ( I think properties)? Sorry I live in California and I am at school so I can't check I just want to get it all down before proceeding so if we can continue with the procedure that would be great too(just FYI if I respond late) . so basically if you can clarify where my file extension is and how to remove it that would be awesome :D.
Also I am using the ti-nspire computer link program( I think it is the wrong one), could you tell me if that is the right program or link me another program I could use? I think it is the wrong program because whenever I try to put anything in my documents with the computer link system it tries to upgrade my os and I am not sure if that is pushing the 3.4. Is where it will lock me from downgrading or if it is just trying to place the files into my documents.

36
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 10:55:16 pm »
I am sorry for exaggerating the urgency of my status.
sorry i live in cali so I didn't know most people here were from Europe
And as i mentioned i have no use for cheating with my nspire i just need it for the class and maybe college classes (if the professor allows it) other than that i don't use my nspire for anything else. I mean that's the best i can do to ensure you that i won't cheat i am not sure how to put it any other way.

Anyway sorry for rushing....

Edit: where do i put the nlauncher and how( i think my roots but i am not sure where that is)? Also when you said TNOC my cas.tns do i just delete boot 2 or is there something more? Also if i deleted boot 2 on my cx 3.1.0.392 file(not the one i am currently running) do i have to redownload that with the boot 2? do i use my ti nspire computer link program and where is the roots i am suppose to have a root but i can't find it? Please go really basic on me! and thanks!

Edit: So i am going to go to sleep but if anyone else wants to help me, here's the basic rundown. I am horrible with directions and i know the directions are posted (https://github.com/Excale/nLaunchy/) there but I am still totally lost. So far from what i have done is this
{Anyone please tell me what is wrong with what i have done and what i need to fix or etc}
0). i put the two documents that i had(my back up) into my comp
Before that i downgraded from my ti-nspire Cx 3.2 to 3.1.0.392 and i downloaded TI-NspireCXCAS-3.1.0.392( it's just in my computer nothing installed or anything like that). From there someone told me to TNOC it but when they said that i am not sure if they mean just deleting boot 2 or something else. While pondering among that issue i also found that i didn't do the step number one on the website( and i really don't know what to do so).
So if anyone can help me pull out of this mess that would be so awesome!
BTW my objective is to run ti-nspire cas on my ti-nspire cx because my teacher recommended it.

37
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 10:33:41 pm »
I see thank you so much. Could you tell me the next step please?

Edit: If the next step requires another program than the one i have (Ti-Nspire Computer Link) could you link me the right one so i can continue with this process please? Thank you so much btw

Edit: fourtytwo:I have used it on the 3.1.0. one not the cas one. Sorry for being so vague I am not sure how to send those files into nlaunch :(

Edit: lkj can you tell me the next step please. So far i downloaded the cas os and am stuck on what to do i am not sure what fourtytwo meant by you put it into nlauncher.

38
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 10:30:54 pm »
So when you told me to download the OS, was that the next step or an emulator for my PC? If it were an emulator for my PC  please tell me the next step so i can continue with this process.

39
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 10:19:45 pm »
i would like one on my cx too please that was the main reason i came here. If that was the next step that you were telling me i apologize but if not please tell me how to continue on my cx.  

Edit: I promise not to cheat please help me understand how to proceed with this process.

Edit:(No Sarcasm) sorry i should have read the rules more carefully i will not double post sorry about that.

40
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 10:11:17 pm »
Sorry for my grammar
um so how do i say something if i can't post twice in a row do i wait until he posts something?( i am new and sorry if that sounded like sarcasm)
thanks for confirming i did step 0 correctly.
I would like to do this because my teacher said that he recommends that each student get a ti-nspire cas but i got the cx a while ago and don't want to sell it and buy another one i just want to use this for this class and maybe in the future(definitely not on tests where the cas is prohibited only where it is allowed) Could you help me on continuing how to do this please?

Edit: I have 3.1.0.392 on my calculator and i have used TNOC to remove the boot2 and renamed it phoenix.tns that is all. Could you help me continue from there by addressing if i am currently using the right program from my computer (ti computer link program) and if not where i should download the new one.

41
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 09:56:26 pm »
Oh no we were doing so well and I am using computer link software and I just dragged the two doc. That I had to my computer if that was how you did step 0 and before you go can you let anyone else on the forum I am in need of dire help?

42
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 09:52:29 pm »
So how do I do step 0 like could you please explain the method how? And step 2 can I just omit since I am on 3.1.0.392. And i have the 3.1.0.392 on my computer. So if you could please explain how to approach step 0 and then tell me what to do next that would be great.  BTW thanks soooooo much you don't know how much you became like a savior after you responded :)

43
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 09:47:16 pm »
So from step 0 I am totally lost on how to even do that :( and rest is step 1-2 saying just make sure your calculator is on 3.1.0.392?

44
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 09:40:43 pm »
Nothing could you please help me from scratch please. When I said couple steps down I just meant I downgraded to 3.1

45
TI-Nspire / Re: nLaunch: Now for CX!
« on: August 26, 2013, 09:30:33 pm »
Um sorry i am such a noob can anyone help me though with all of it i think i got a couple steps down but
i have a ti-nspire cx and want a ti-nspire cas on it so i got the n-launcher and read the readme but as i mentioned i am an uber noob can you guys help me with instructions dumbed down to the very basic. I am not sure like where root is etc. I am on the inspire cx 3.1.0.392.

Pages: 1 2 [3]