This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - InspiredByCas
1
« on: April 14, 2013, 06:47:39 am »
Basicly nothing.
But he got it charged somehow, and now he deleted ndless.
2
« on: April 08, 2013, 08:14:30 am »
Sorry for posting in here again, but I think when I modify my last post, noone will notice...
Everything is ok now, I sent my CAS to the 'factory' where my school bought it and then a few weeks later I got a completely new one. Currently, I do not have ndless installed or something.
I installed ndless for a classmate (date: 7 March 2013) who wanted to have pokemon on his calc, so I did that for him. He has now ndless, GBA and GBC emulators and nover which is in ndless startup folder and is set to ~200MHz CPU and Base, the text for the bar for the filesystem is not in red color.
Today, after the holidays, he said to me that his calc won't charge anymore, neither on pc nor with a USB charger. I experienced this also with my old CAS, it did not charge. Today, our teacher put his CAS in the docking station and even there it did not load, it did not even boot, the display was black.
I fixed that problem on my calc with booting and skipping ndless startup folder by holding Esc while booting. Then I could charge that thing. But the CAS of my classmate won't even turn on.
I suggested swapping batteries and try charging it with another CAS, but teacher and classmate said no.
So ndless/nover somehow destroys the calcs?
Can the CPU overheat by overcloking it too much?
3
« on: March 16, 2013, 04:15:12 pm »
I formatted everything with maintenance menu. I can't get into diags menu. Can I clear the SRAM by disconnencting the battery over night?
4
« on: March 16, 2013, 08:43:14 am »
When I delete everything on my calc with TILP, can TI find out that there has been ndless installed or something?
edit: Somehow doc + enter + EE worked. I formatted the calc and reinstalled OS, but I still get the same error.
5
« on: March 13, 2013, 11:46:10 am »
ctrl+0 actually opens up the scratchpad.
Ok, I did not know this.
6
« on: March 13, 2013, 11:01:13 am »
When I tried to switch my calc on today in school with the power button, it showed very short the homescreen and then it restarted like i pressed the reset button on the back.
I thought that some ndless stuff maybe did this, so I let it reboot. Then I noticed, that only a few keys worked. Esc, ctrl, tab, menu, enter and ctrl + home work properly, the rest is totally messed up. After ctrl + home the calc goes off, when I press on again, it crashes like I described. For example, ctrl + 0 acts like the scratchpad button. doc works as the home button. shift like del. And so on. Some keys are not mapped at all. Touchpad is also dead.
I cant go to the menus from boot1 or boot2, when I press the standart keys (e.g. esc + menu + minus) nothing happens, when I press the keys so, that it should work (in my case esc + menu + q (q is mapped as minus)), nothing happens, too.
I reinstalled the OS, no change. Even unplugging the battery did not help.
When everything worked ok, I had the ndless 3.1 beta installed and the cpu was running at 210 MHz, the AHB was not in red text.
Everything worked ok for months, until today morning. Maybe I have still warranty on it.
Please help me! I need the calc for school!
7
« on: February 27, 2013, 08:34:58 am »
One more question before I make a hub purchase: What is the largest number of ports supported (or recommended) for Linux?
I'd like to get one with more than four and have seen some with ten, but I wanted to make sure something like that would work.
The maximum number of USB ports would be 127. Then the USB address range is exceeded.
8
« on: February 13, 2013, 04:36:41 am »
Your Bootloader should have white background and black text. Something like this: 
9
« on: January 23, 2013, 07:57:09 am »
Nowadays, /dev/sda is usually the host disk of the host computer (or the VM), so you probably mean /dev/sdb Better change this before an idiot types this in an terminal on his pc....
10
« on: January 16, 2013, 02:35:51 pm »
Please don't post anything related to cheating here 
Remember that cheating is bad and not to be taken lightly! That's the view on cheating here, please don't risk a topic lock only because of this.
Sorry. I deleted that part of post.
11
« on: January 16, 2013, 08:11:36 am »
I will test that crash on file change further, yesterday I haven't had much time.
Another good feature would be, if you open a file and do NOT modify it, it should not ask if the file should be saved.
12
« on: January 15, 2013, 12:01:21 pm »
nTxt crashes when the file which is opened in nTxt, is changed via computer.
Then you have to do a hard reset.
13
« on: January 06, 2013, 01:20:19 pm »
But now, I have new problems, like linux asking me to login again and again after a few seconds/minutes, and I can only type a few characters like + or enter.
Also, why is home mapped as ctrl and not the "ctrl" key?
Wrong keyboard mapping...? I think you don't have a CAS CX... can someone tell me how to connect an usb drive to linux on my nspire cx?
You can buy a OTG USB cable with a mini USB 5-pin A connector on one side and ot the other side there should be female USB plug. Or, if you are impatient and if you can solder: (my selfmade solution) You desolder a double-USB-plug from an old mainboard and connect all 8 pins in a way that you get 4 parallel connections. That was the hardest part. Then plug in the end of a mini USB A connector (you can use the cable which came came with your CAS for exchanging data between two calcs; plug in the thicker end which says 'A' and leave the other end unconnected) and start linucx. While linucx running, deconnect the mini USB A cable and connect the standart cable (I mean the cable which you can connect to your CAS and to your PC) plug it in the CAS and the 'adapter' which you soldered before. The other port of your 'adapter' should get connected to a powered USB hub and then you can connect all your devices to your hub. If you are booting from a USB stick you maybe should increase the rootdelay.
14
« on: December 23, 2012, 05:33:57 pm »
Someone should update teh FAQ. We can run X now...
15
« on: December 23, 2012, 05:04:54 pm »
how can I start blackbox? It doesn't come with a replace option and can't start without x.
|
Show Posts