This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - critor
Pages: 1 ... 66 67 [68] 69 70 ... 137
1006
« on: October 27, 2011, 06:35:38 pm »
FlashDiags is released: http://tiplanet.org/index.php?mod=archives&ac=voir&id=3744Grab it while you can  You can now downgrade/upgrade your diagnostic software, or flash a new one if you've deleted it. Be sure to read the Readme. You'll need an officially signed diagnostic image and none of them are included or findable on TI-Planet for now. Don't flash a diagnostic image not suited for your hardware, as diagnostic softwares are storing their status/configuration in NAND ROM and don't use to clean/reset them. If an unsuited diags does corrupt these informations, it can make the diagnostic softwares unusable. - basic ClickPad -> only non-CAS 1.X Diags images - CAS ClickPad -> only CAS 1.X Diags images - TouchPad -> only 2.X Diags images And if you dig with the source code, be sure of what you're doing! Writing at different NAND ROM addresses can brick your Nspire, and it won't be fixable through software...
1007
« on: October 25, 2011, 02:28:52 pm »
We did it again!!!  After his diagnostic flasher in the previous news, Bsl sent me a Boot2 flasher today. I had prepared my RS232 interface in case of bricking problems, but Bsl is so great that it worked on the 1st try on both ClickPad and TouchPad models! No need for an RS232 inteface anymore! You can freely upgrade/downgrade your Boot2. Beyond upgrading/downgrading the Boot2, try to think about everything that could be achieved with this new Ndless program... Another great day you shouldn't forget in the Nspire history!  For more informations and photos: http://tiplanet.org/forum/viewtopic.php?f=43&t=8363
1008
« on: October 25, 2011, 02:22:52 pm »
1009
« on: October 25, 2011, 02:02:25 pm »
I'm newsing on TI-Planet, and I'm back.
1010
« on: October 25, 2011, 02:01:06 pm »
Not yet 
1011
« on: October 25, 2011, 01:47:20 pm »
Both last posts are "interesting"
1012
« on: October 25, 2011, 01:37:35 pm »
Let's switch parts for today. This time I give you the image, and you guess the news which has not been published on TI-Planet yet!  http://tiplanet.org/forum/gallery/image_page.php?album_id=13&image_id=267Let me tell you that this is going to be one of the most important news in the TI-Nspire history. Feel free to ask any question.
1013
« on: October 25, 2011, 10:52:21 am »
Oh thank you very much  Yes, I could add the image compressed/decompressed size...
1014
« on: October 25, 2011, 08:46:44 am »
Let me report you 2 new things on TI-Planet, which might be of some interest to you. 1st, I've compiled the most comprehensive list of all hardware Nspire versions in the world: OS, Boot1, Boot2 and Diags, with many details on each OS version (Boot2 included, 84+SE system included, minimal OS for downgrade protection...)Even prototype, development, CM, CAS+, Navigator, ViewScreen and LabStation versions are included!http://tiplanet.org/forum/viewtopic.php?f=15&t=83582nd, we have opened a new image gallery with schematic skins of TI calculators, which could be very usefull to you for emulators or websites, as they can easily be integrated with every background. Get even exclusive schematics skins of the new CX/CX-C/CM-C Nspire!http://tiplanet.org/forum/gallery/album.php?album_id=14The images are protected by a watermark for guests/robots, but it will go away if you are registered and identified on TI-Planet.
1015
« on: October 24, 2011, 12:29:32 pm »
so is that mean I can install CAS OS in my non-CAS nspire? yay!
You can allready run a CAS OS on a non-CAS Nspire, can't you ? And the official Boot1/Boot2 images won't help with that as they are identical on non-CAS and CAS models.
1016
« on: October 24, 2011, 04:54:43 am »
Should i download something quickly just in case?
We haven't published the program yet. Wow... this is awesome! Does that make this statement a little less true?
No, this has nothing to do with Ndless 3. It's just a Ndless program and so it cannot be used on CX calculators or 3.x OSes yet. But you could soon be able to patch your ClickPad/TouchPad Boot2 or replace it totally by a 3rd party Boot2... Just imagine what could be done after that... Let's sum up: everything!
1017
« on: October 23, 2011, 07:30:05 pm »
We did it!!! Bsl as a developer, and me as a tester who doesn't fear bricking one or two Nspire, have finally, after severall months of work, managed to reflash the Diagnostics software included in the Nspire through an Ndless program today. No need for an RS232 inteface anymore! You can freely upgrade/downgrade your Diagnostics software, install a CAS Diagnostics on a non-CAS model, install a TouchPad Diagnostics on a ClickPad model... Tested on 5 calculators, with 3 different models among them: 100% success rate. What? Useless you say? You never use the Diagnostics software? But remember that the Diagnostics software is in NAND ROM, just after the Boot2... The Diagnostics was just a way to test NAND ROM reflashing with the minimal risk of bricking the Nspire. Imagine that you could soon be able to upgrade/downgrade your Boot2 just by pressing "Enter". Imagine that you could mod your Nspire ClickPad prototypes into production models by replacing their development 1.1 Boot2 which won't let you install any 1.3 or above OS, by a production Boot2. Of course, the development Boot1 would have to be replaced by the production Boot1 too, or the production Boot2 won't be run. But we're getting nearer and nearer... Another great day you shouldn't forget in the Nspire history! For more informations and photos: http://tiplanet.org/forum/viewtopic.php?t=8348
1018
« on: October 23, 2011, 11:00:38 am »
No we don't have any secret.
Ndless 3.0 does *not* exist at all for now, not even in an alpha version.
3.x OSes / Boot2 are full of watchdogs which will force the calculator into rebooting when something abnormal is detected for a certain period (when you manage to take control on the hardware over the OS for example).
Ndless 3.0 probably won't even be out this year, seeing how TI has protected the 3.x versions. You should better develop/use Lua programs, or move to Casio Prizm.
Sorry, but it will be useless for you to ask again for Ndless 3.0 tomorrow, next week, or even next month... The answer will probably be the same.
It's very hard and if you want it out sooner, you should join and help with its development if you are able to... There is no other way.
1019
« on: October 20, 2011, 05:26:00 pm »
Which model? TI-Nspire TouchPad? TI-Nspire CX?
You tried to install a non-CAS OS of course, didn't you?
1020
« on: October 18, 2011, 03:28:01 pm »
Bon Mic c'est le dernier avertissement.
Tu cesses définitivement de me diffamer et de m'attaquer sur Internet.
Est-ce que je parle de toi moi sur Internet?
Est-ce que je suis seulement intervenu sur ce topic récemment pour parler de toi?
Je ne comprends donc absolument pas que ton topic soit centré sur ma personne.
Tout ce que tu cites a déjà été expliqué 36 fois en public ou en privé, mais tu tentes une fois de plus de profiter de l'indisponibilité de ces informations publiquement pour t'attirer la pitié/sympathie des personnes qui ne seraient pas au courant de la réalité de l'histoire.
Sans compter les affirmations totalement mensongères/inventées.
Tu reprends toujours les mêmes arguments, sans tenir aucun compte des différentes réponses qui t'ont été apportées depuis 7 mois.
Merci donc à Levak d'avoir répondu sur un point. Je peux parfaitement te ridiculiser sur tous les autres points en citant emails ou logs de chat et démontrer que tu es un grand menteur manipulateur aux yeux de ceux qui ne l'auraient pas encore compris, mais j'ai autre chose de plus constructif à faire de ma soirée.
Dommage que ma réponse détaillée où je te reprenais point par point sur Espace-TI ait été supprimée.
N'ayant pas l'intention de perdre mon temps à exercer mon droit de réponse pour quelqu'un qui une fois de plus n'en retiendra rien, je demande à l'équipe Omnimaga la suppression au plus tôt de ces diffamations mensongères, étant cité et identifiable.
Je comprendrai alors parfaitement l'effacement simultané de mon message.
Merci.
Pages: 1 ... 66 67 [68] 69 70 ... 137
|
Show Posts