This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - ferox
16
« on: February 11, 2011, 04:38:32 pm »
lots of pins, just like the hard drive of my pc, but a smaller distance between them
17
« on: February 11, 2011, 01:01:43 pm »
if you have a calc with 2.53 or higher, you can use the function remainder( like this:
If not(Remainder(N,A
Then
//code
End
Remainder gives the what is left after dividing so you can also use it like this:
Remainder(N,A->X
If X=Y
bla bla bla...
remainder can be found in the math menu
but i wouldn't recommend it since it doesn't work on OS 2.43 or lower...
18
« on: February 11, 2011, 02:22:30 am »
This laptop is fairly recent, right? (Check your user manual to make sure it has a SATA hard drive.) You can either buy an external 2.5" sata enclosure, which lets you connect the drive to another computer over USB, or when you get a new laptop, you should be able to install the old drive in the new computer, though windows won't start and you will need to use a boot cd to back up your files.
That was a long sentence.
with a short answer. i have no manual, is there any other way to check this?
19
« on: February 10, 2011, 11:07:19 am »
there wasn't that much on it, only office 2007 i believe. but i have no system that can read the hard disk  Um...you don't have another computer that has the same type of hard drive?
not that i know, other laptop i have (windows 98, was also free  , i use it sometimes) doesn't fit, and i also can't get it into my normal pc...
20
« on: February 10, 2011, 10:22:06 am »
well, if you have, you can try to archive and delete stuff  but since i don't pm that much, i suppose i will not be a problem  , but it would be great for admins and others
21
« on: February 09, 2011, 04:40:11 pm »
Have you tried a CMOS clear? There is a location on the motherboard where you can connect two pieces of metal together with a paper clip to reset the BIOS and the motherboard.
uhm, that would be really difficult, because i can't get to the motherboard without breaking anything
22
« on: February 09, 2011, 04:31:21 pm »
there wasn't that much on it, only office 2007 i believe. but i have no system that can read the hard disk
23
« on: February 09, 2011, 04:08:24 pm »
i'll have to find the power cable first ì'll edit in a minute edit: with RAM removed: no beep RAM reinserted: no beep i also noticed that when i turn it "on" the green lights indicating it does something flash on for about 1/4 of a second
24
« on: February 09, 2011, 04:06:46 pm »
Easy.
Remove the RAM from the computer, then replace it back in the computer.
tried that.. no difference
25
« on: February 09, 2011, 03:02:34 pm »
Just curious, if your laptop is dead, how are you posting on here?
i have another pc, that laptop was a used one... it was free  Can you enter the BIOS Setup? If so, all you need to do is reinstall Windows.
nope, the screen stays black. like i said, i think the bios is corrupted. Take out ALL of the ram, and turn it on and see if it beeps at you.
i will try that I don't think it'll even turn on?
Speaking of RAM, physically resetting the RAM might work.
like i said, all you hear is the fan making a lot of noise and how do i physically reset it?
26
« on: February 08, 2011, 03:26:55 pm »
it's a medion MD 41300 if im right [offtopic] what is wrong with 69?  [/offtopic]
27
« on: February 08, 2011, 10:48:05 am »
if it would be possible, it would be epic
but is it then also possible to insert a flash chip of 2gb or so?
No.
We might be able to replace the 1Mb flash chip in basic TI-84+ by a 2Mb flash chip, only because they seem to be using the same PCB as the TI-84+SE which allready have a 2Mb flash chip.
pity but now i won't spam this topic anymore
28
« on: February 08, 2011, 10:46:07 am »
yes,OS is windows XP home edition but i don't hear a beep... here is the complete story: first my laptop used to give a bsod once in a while, but i ignored it. then at one time, as soon as it started it gave a bsod, i couldn't even format C:/ then, i tried to get out 1 RAM card, a 128mb, so i had exactly 1gb left (tip from a friend) it seemed to work, but after 1 or 2 minutes, it gave one last bsod, and then turned into something best describeable as a soulless body
29
« on: February 08, 2011, 07:45:27 am »
just wondering.
my laptop is kinda dead. when i press the on button, you hear the fan, but thats all. no screen, no sound, nothing whatsoever, not even the lights that say it was turned on.
i think the BIOS is corrupt or so
my question:
is it possible to bring it back to life?
30
« on: February 08, 2011, 07:34:54 am »
if it would be possible, it would be epic but is it then also possible to insert a flash chip of 2gb or so?
|
Show Posts
