This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - p2
16
« on: August 12, 2011, 09:08:16 am »
I made this topic because I needed a place to upload picture and to discuss with Freyaday about the FPA-project! (Freyaday will continue it!)  Freyaday: These are the first few pictures! I'll make the others and upload them as soon as possible! I hope they're good enough! In most of the cases, two 8x8-pictures will be enough! but sometimes the pic must be 16x16 (snail, backflip from wall, ...) should I make pictures for swimming, too? and for that mouse with a gun? And the rabbit?
17
« on: August 02, 2011, 07:44:36 am »
Sorry that I open a new Topic again, but the degree of destruction of my TI has reached a new level! My OS: 2.43 TI type: TI 84+ I was deleting the full archieve. Then, today, I was trying a selftest, too. (MODE, ALPHA, S) It told me: BOOT Code 1.02 DASE Code 2.43 Enter Self-Test? This will delete all memory Press [ON] to cancel I pressed ENTER START? I pressed ENTER 24075 I pressed ENTER 0 ROM FAIL I pressed ENTER Ramclear! I made it again, but the second time, it wasn’t 24075, which was shown. The number has changed. I repeated it a few times: I don't think this is good (I'm sure this is very bad), so I opened a new topic because I have no idea what to do!!! But I have an idea what was the cause of all this: I downloadad an ASM-program, which allowed me to write a short text, which will be shown in 2ND + MEM => AboutThe program was aboutnamafter I made this, it has all bogone.
18
« on: August 01, 2011, 01:06:56 pm »
I've sent tag to my ti. After playing it, No names of the programs were shown in MirageOS. After that, I've sent this greyscale-nyancat on my TI. Now, I've always this ERR:MEMORY after using APPs And in MirageOS, every font is large, not small. Even on my graph-screen, the coordinates are in large Font. 
19
« on: July 31, 2011, 08:14:46 am »
How may I save this datas? I can't copy/delete/move them. This was a part of a presentation for school (about drugs) I made one jear ago. May I do anything to get the data back? Interresting are the date of last editing and the names:
20
« on: July 27, 2011, 11:11:26 am »
I've made a little program in Axe language. (axe 1.0.2)
I've tried to make a program, where you (a ball) can walk on courved lines, and needed a bit more than two hours for it.
But the ball is standing in the air if the Y-coord is 14.
So I added
:if Y=14
:if getkey(2)+getkey(3)=0
:Y+1->Y
:End
:End
But why is the ball stopping there?
It's NOT a finished game.
21
« on: July 25, 2011, 08:38:30 am »
Ich lese gerade das Buch Alex Rider: Scorpia rising (Buch neun) von Anthony Horrowitzt
Das buch gibt es bisher nur in Englisch.
Im Buch 5 kommt es vor, dass jemand sich klont, und den Klon dann mittels OPs so aussehen lässt wie Alex Rider.
In buch 9:
Alex wurde von dem Klon entführt:
Alex followed his doppelgänger in a long, narrow building set right next to one of the walls.
Meine Frage ist, ob es das Word auch im Englischen gibt, weil kein übersetzer erkennt es aks englisches word.
(ist Anthony Horrowitz ein Deutscher, der behauptet Engländer zu sein, oder wieso ist das Deutsch?)
22
« on: July 24, 2011, 01:59:21 pm »
I really don't know what to do: Yesterday I opened the program list and scrolled down to "S". After 8 minutes it wasn't ready. (I havehad veeeery many programs) I took the batteryes out and tried to delete the OS (I have ramclears very often, my calc doesn't support greyscale, 2nd OFF isn't possible, ...) The only thing it made was: Ramclear! Tried three times again. Ramclear! Ramclear! Ramclear! Then I wanted to delete the programs and groups (I have more groups than programs) So I made an archieve clear, but only the programs, groups, ... (NOT the OS and the APPs) Then, eerything was gone. But I had hundreds of new programs: BASu BASu BASu BASu BASu ... I tried to open one: ERROR Editing one: TI went off RAMCLEAR programs (UNARCHIEVED) still there deleting one: TI went off RAMCLEAR programs (UNARCHIEVED) still there I tried to delete the OS again. only the programs were gone TODAY: Now, I loaded Axe 1.0.1 on my TI. (hasn't ever worked before. but now it has!!) I tried to edit an archieved program (axe-code) TI went off! Ramclear! My archieved programs are still there. But the programs (BASu) are back!   WHAT SHOULD I DO??
23
« on: July 19, 2011, 09:23:55 am »
Hab mal nen Satz von 2 Übersetzern übersetzen lassen. Welche TOLLEN Übersetzer nutzt ihr eigentlich? Das Automobil (marke VW) hat getönte Scheiben und einen Getränkehalter zwischen den Vordersitzen.
La voiture (VW) a vitres teintées et un porte-gobelet entre les sièges avant. The car (VW) a tinted glass and a cup holder between the front seats. Das Auto (VW) ein getöntes Glas und ein Cupholder zwischen den Vordersitzen. Hört sich grammatikalisch sehr interessant an...  Wusstet ihr eigentlich dass Cupholder ein Deutsches Wort ist?
24
« on: July 17, 2011, 01:57:23 pm »
Gibt es hier ASM-programmierer, die Deutsch sprechen?
25
« on: July 16, 2011, 04:59:23 am »
Ich habe in eine PowerPoint Präsentation ein .avi video eingefügt.
Aber Ich kann es irgendwie nicht abspielen.
Wie kann man videos abspielen?
Wenn ich auf VORSCHAU klicke, passiert nichts.
Bei Bildschirmpräsentatin auch nichts.
26
« on: July 14, 2011, 11:24:52 am »
Mich würde mal interressieren, was für TIs eigentlich in Deutschland am häufigsten sind.
27
« on: July 13, 2011, 12:09:39 pm »
What's about a special section in Omnimaga for the German programmers?
If there'll be a german section, more german programmers will join Omnimaga.
And if more german programmers will join omnimaga, We'll need the german section.
And if more german programmers will join omnimaga, all te german omnimaga-members will be happy.
28
« on: July 13, 2011, 11:24:11 am »
Can anyone Help me? I try to draw pictures in this funny code [0011001ABC1054332324...] But don't know how. I always changed something in the code, and wondered about the chacture. but I have no idea how to draw correctly in this code. For example, how to draw this x-Wing? (I mean in a 12x8-picture, or something like this.
29
« on: July 05, 2011, 10:39:02 am »
Please help!
Someone of my class (in school) has a really bad but on the TI:
The batteries are only thee days old, but the TI is starting.
If you press [ON] nothing happens.
But if you press on lonher (hold it), the whole screen gets darker.
But really onla a bit. And very slow.
after one second, it stopps with getting darker.
Then nothing happens.
If you stop holding [ON], the TI turns off, again.
I've tried everything.
First I thought, It was a very unfriendly ASM program or an APP in "autostart"
but I've changed the batteries while pressing on, and everything else.
Tomorrow we'lol write a class test, were we need our TIs.
My idea is, to turn out the BACK-UP-BATTERY.
But I'm not sure if it won't kill the TI. (In cause of the bug)
should I turn out the Back-up-battery, or not?
30
« on: June 29, 2011, 12:46:05 pm »
I need help with my TI NSpire CX CAS.
I've tried to register my TI, but it says that it's no correct licence-code for this sort of product.
But it's the correct code. And it's the only code I have.
WHAT SHOULD I DO???
And how to send a gme like Bobby Carrot to my TI?
|
Show Posts
