Author Topic: Your Projects - Post and Critique (Read 116738 times)

Darl181 · « **Reply #435 on:** July 19, 2010, 03:49:49 pm »

About Mirage interrupts relating to axe...
I think that's what FnOn and FnOff do.

return-if?? cool
I should read the commands list more often.

So if It's is a subroutine, and you say Goto E, Lbl E still runs as a subroutine?

calcdude84se · « **Reply #436 on:** July 19, 2010, 03:56:42 pm »

No, it'll just goto it, and you won't be able to return to where you were (either going to somewhere else in the program if you had nested subroutines, or exiting from the program)
You'll still have to use sub( to call subroutines. (An exception to this, which you may or may not be able to take advantage of, is that "sub(E:Return" (If it's just a plain return) can be replaced with "Goto E" and everything will be fine)

nemo · « **Reply #437 on:** July 19, 2010, 03:57:45 pm »

the commands list is your friend. print it out. keep it. read it. love it. cherish it. have it. always.

yes, you can nest as many subroutines as you want, practically. i think there's a limit but it's impractical to need to call that many subroutines. for example, this piece of code is entirely allowed:

Code: [Select]

0->X
Disp Sub(C)>Dec
Lbl M  .Multiply
X*2->X
Return
Lbl A  .Add
X+1->X
Return
Lbl S  .Subtract
X-1->X
Return
Lbl MA .Multiply then Add
Sub(M)
Sub(A)
Return
Lbl C  .Compute X*2, then X+2, then X*2, then X-3.
Sub(MA)
Sub(A)
Sub(M)
Sub(S)
Sub(S)
Sub(S)
Return  .This return is unnecessary, because it's the end of the program.

Edit: i feel like optimizing.

Code: [Select]

Disp 1->X>Dec

Darl181 · « **Reply #438 on:** July 19, 2010, 04:08:34 pm »

I did print it out. I have one of those Avery [not-so-]Durable Reference binders with a notebook, documentation, and commands list.
The binder is MY friend.

Does ReturnIf take care of Fix tokens?
In the commands list, it says 'exit in this mode if changed.'
How can, say, Fix 2 and Fix 4 be done on exit?

nemo · « **Reply #439 on:** July 19, 2010, 04:11:35 pm »

No, ReturnIf does not take care of Fix tokens. you may want to post that in feature wishlists though, because that sounds like a good idea.

rather than

Code: [Select]

ReturnIf getKey(15)

you could always do the following:

Code: [Select]

If getKey(15)
Fix 2
Fix 4
Return
End

calcdude84se · « **Reply #440 on:** July 19, 2010, 04:12:48 pm »

Either hope the OS can deal w/it (bad idea), have something like

Code: [Select]

sub(M
Fix 0
Fix 2
Fix 4
Fix 6
.There may be more, but you get the point
Return
Lbl M

at the very beginning of your program, where Lbl M is the start of the code, or have the program Goto a Lbl that does the cleanup then returns for it. The second option is probably the best, since you can just add that one piece of code and not have to worry about modifying any other part of your code.

Darl181 · « **Reply #441 on:** July 19, 2010, 04:20:38 pm »

That's what I've been doing.
the If getkey(15) thing.

For clarification:
So, would ReturnIf end the program if it's put into, say, a subroutine made into a pause menu?
Or would it still act like a subroutine and go back to whatever it was doing before?

nemo · « **Reply #442 on:** July 19, 2010, 04:25:24 pm »

If ReturnIf is in a subroutine, it will just exit the subroutine. do you need to have the pause menu in a subroutine? if the subroutine isn't being called more than once, you could just have the subroutine's code in the main program. otherwise, using calcdude4se's method is probably best.

calcdude84se · « **Reply #443 on:** July 19, 2010, 04:25:56 pm »

If you used sub(, yes, it'd act like a normal subroutine.
Edit: ninja'd again!

Darl181 · « **Reply #444 on:** July 19, 2010, 04:40:56 pm »

What does the Ninja'd thing mean?

Okay, something on topic. I'll try to save the thread.
I went to experinent with the left-right movement system in jetpack and combined it with papijump-like scrolling.
Idea.
If it's too hard, chande the values at the beginning of the source.
dplt=depletion rate.
gain=how much each line thing gives you
ftsw=fuel to start with
line on bottom is fuel gague.
the rest is self- explanatory.
got to go, session's about to time out.

calcdude84se · « **Reply #445 on:** July 19, 2010, 04:46:23 pm »

Looks interesting, I might look at it later.

As for what "ninja'd" means:

Quote from: Urban Dictionary

When posting on a forum, you submit a post only to find that someone has posted the same thing only seconds earlier.

DJ Omnimaga · « **Reply #446 on:** July 19, 2010, 04:50:04 pm »

Ninja'd means when you post something (generally an answer to someone's question) only to find out someone posted the same thing like a few seconds before.

Also that game seems really cool! I think if it had a title screen and increasing difficulty, you should submit it to ticalc.org. For some reasons it reminds me of Audiosurf, but with no music.

EDIT: Ninja'd

calcdude84se · « **Reply #447 on:** July 19, 2010, 04:55:05 pm »

[offtopic]
Okay, there has to be a word for this, when somebody is naming something only to become an example of it...
DJ, you've been the example both times, with the bump to the thread about the hardest calc game ever and now, ninja'd while posting about what it means to be ninja'd.
Any ideas?
[/offtopic]

Okay, back on topic. Well, if I could think of something to post

Actually, I do have something to say. I agree with DJ that you should submit it to ticalc.org if it has a title screen and increasing difficulty. Good game!

nemo · « **Reply #448 on:** July 19, 2010, 05:01:15 pm »

calcdude84se: coincidence? i'm not sure of the word. it is not irony. if someone says that i'm going to throw some furniture. although i don't really think there's a word. for when you name something but become the example... nothing in my vernacular. just coincidence, i guess.

and ontopic, that game looks pretty good. is that as fast as it runs?

calcdude84se · « **Reply #449 on:** July 19, 2010, 05:05:38 pm »

Yeah, I guess coincidence is the best I'll get. With respect to irony, I find it to be quite the opposite.

Author Topic: Your Projects - Post and Critique (Read 116738 times)

Darl181

Re: Your Projects - Post and Critique

calcdude84se

Re: Your Projects - Post and Critique

nemo

Re: Your Projects - Post and Critique

Darl181

Re: Your Projects - Post and Critique

nemo

Re: Your Projects - Post and Critique

calcdude84se

Re: Your Projects - Post and Critique

Darl181

Re: Your Projects - Post and Critique

nemo

Re: Your Projects - Post and Critique

calcdude84se

Re: Your Projects - Post and Critique

Darl181

Re: Your Projects - Post and Critique

calcdude84se

Re: Your Projects - Post and Critique

DJ Omnimaga

Re: Your Projects - Post and Critique

calcdude84se

Re: Your Projects - Post and Critique

nemo

Re: Your Projects - Post and Critique

calcdude84se

Re: Your Projects - Post and Critique