Author Topic: nspire Linux Questions (Read 152890 times)

noobnonin · « **on:** November 15, 2012, 01:48:03 pm »

vogtinator

can you please tell me how to install the links on the ti nspire or if its already posted can you tell me where and how
thanks..

Regards

noobnonin · « **Reply #1 on:** November 15, 2012, 02:11:03 pm »

Quote from: Eeems on November 15, 2012, 02:05:54 pm

From what I can tell it's already in the image. Just type links in the command line, press enter and it should work.

it says " -sh :links: not found "

Eeems · « **Reply #2 on:** November 15, 2012, 02:13:58 pm »

Quote

it says " -sh :links: not found "

Well try what was said before your post. If trying to run links still says command not found try running this: /usr/bin/links

noobnonin · « **Reply #3 on:** November 15, 2012, 02:31:43 pm »

Quote from: Eeems on November 15, 2012, 02:13:58 pm

Quote
it says " -sh :links: not found "
Well try what was said before your post. If trying to run links still says command not found try running this: /usr/bin/links

still not found.... T.T

is it because my rootfs is not mounted?

i have this message when starting:

" waiting 10 sec before mounting root device..
Ramdisk: ext2 filesystem found at block 0
Ramdisk: Loading 2061Kib (1disk) into ram disk.. done
VFS: mounted root (ext2 file system) on device 1:0

Welcome to buildroot
Buildroot login: root.... etc.... then i type /usr/bin/links.... still not found "

Regards,

Eeems · « **Reply #4 on:** November 15, 2012, 02:34:23 pm »

Quote

still not found.... T.T

Did you do what was said before your post first?

noobnonin · « **Reply #5 on:** November 15, 2012, 02:51:23 pm »

Quote

waiting 10 sec before mounting root device..
Ramdisk: ext2 filesystem found at block 0
Ramdisk: Loading 2061Kib (1disk) into ram disk.. done

Quote

Don't use a initrd! It's not needed and you can't save anything!
Use an USB-Stick as root fs!

so the usb should be in ext2? or fat?

Vogtinator · « **Reply #6 on:** November 15, 2012, 02:57:26 pm »

Quote

so the usb should be in ext2? or fat?

If you use my kernel (which you should, as X is working), use ext4.
If you crash with ext2, it may become corrupt.

noobnonin · « **Reply #7 on:** November 15, 2012, 03:04:09 pm »

errr if the rootfs its in the ram, i cant open links? theres no directory to it if its in the ram?

Vogtinator · « **Reply #8 on:** November 15, 2012, 03:07:32 pm »

Quote

otfs its in the ram, i cant open links? theres no directory to it if its in the ram?

You use an initrd which gets loaded into ram.

noobnonin · « **Reply #9 on:** November 15, 2012, 03:15:05 pm »

vogtinator, did u used dd if=rootfs.ext2 of=/dev/sdb ?? on linux?, are you using a usb with an ext4 format?? and is the usb if u are not, then how did you do?

Regards,

Vogtinator · « **Reply #10 on:** November 15, 2012, 03:22:30 pm »

Do the following: (/dev/sda = USB-Stick)
1. mkdir /tmp/mount
2. mkfs.ext4 /dev/sda
3. mount /dev/sda /tmp/mount (ignore warnings)
4. tar -xvf rootfs.tar.bz2 -C /tmp/mount (The rootfs.tar.bz2 I posted before, download with `wget http://ritter-vogt.dyndns.biz/lowlevel/rootfs.tar.bz2`)
5. umount /tmp/mount
6. Enjoy!

Edit: You have to use my kernel, too.

noobnonin · « **Reply #11 on:** November 15, 2012, 03:35:15 pm »

right away bro ur the best!!

can you post your kernel too??
thanks

Regards,

Vogtinator · « **Reply #12 on:** November 15, 2012, 03:42:47 pm »

I posted it here

noobnonin · « **Reply #13 on:** November 15, 2012, 08:46:26 pm »

Vogtinator, i had a problem look

willrandship · « **Reply #14 on:** November 15, 2012, 09:04:15 pm »

Try opening it with the GUI unarchiver. If it also errors, you probably got your archive corrupted at some point along the way. If it extracts normally, just follow the instructions from there as if tar had worked.