Author Topic: Peripheral Not Identified (Read 37588 times)

kitten · « **Reply #30 on:** May 18, 2016, 04:58:48 pm »

Quote from: Ivoah on May 15, 2016, 08:50:46 pm

I just remembered that there is an issue in my tutorial. For some reason WordPress converts double dashes (--) into single long dashes (–), which messes up some of the commands. Wherever you see a long dash, replace it with two normal dashes.

You know, that would have been a bit useful to know earlier.

Thanks for telling me, I'll try the tutorial again later.

Ivoah · « **Reply #31 on:** May 18, 2016, 05:04:13 pm »

Quote from: kitten on May 18, 2016, 04:58:48 pm

Quote from: Ivoah on May 15, 2016, 08:50:46 pm
I just remembered that there is an issue in my tutorial. For some reason WordPress converts double dashes (--) into single long dashes (–), which messes up some of the commands. Wherever you see a long dash, replace it with two normal dashes.

You know, that would have been a bit useful to know earlier.
Thanks for telling me, I'll try the tutorial again later.

Hehe, sorry about that.
I hope you have better luck the 2nd time around

kitten · « **Reply #32 on:** May 19, 2016, 04:36:42 pm »

Quote from: Ivoah on May 18, 2016, 05:04:13 pm

Hehe, sorry about that.
I hope you have better luck the 2nd time around

I believe it is actually the fifth.

By the way, would having my calculator on 3.9.1 make a difference? Because I just downgraded to check if it makes it any faster than 4.0.3, and since I haven't seen any speed increase so far, and installing during school time has become fairly hard (no, I am not going to take out a computer in the middle of class), I am thinking that downgrading probably wasn't the best idea. Thanks!

Ivoah · « **Reply #33 on:** May 19, 2016, 04:50:55 pm »

Quote from: kitten on May 19, 2016, 04:36:42 pm

Quote from: Ivoah on May 18, 2016, 05:04:13 pm
Hehe, sorry about that.
I hope you have better luck the 2nd time around

I believe it is actually the fifth.
By the way, would having my calculator on 3.9.1 make a difference? Because I just downgraded to check if it makes it any faster than 4.0.3, and since I haven't seen any speed increase so far, and installing during school time has become fairly hard (no, I am not going to take out a computer in the middle of class), I am thinking that downgrading probably wasn't the best idea. Thanks!

OS version shouldn't matter, so long as it runs Ndless.

kitten · « **Reply #34 on:** May 19, 2016, 05:10:22 pm »

Quote from: Ivoah on May 19, 2016, 04:50:55 pm

OS version shouldn't matter, so long as it runs Ndless.

Ok, good; 3.9.1 was giving me a headache. So far, debootstrapping surprisingly seems to be working! Hopefully one last question: since I'm running Lububtu, will the sources.list need to be changed?

Ivoah · « **Reply #35 on:** May 19, 2016, 05:51:33 pm »

Quote from: kitten on May 19, 2016, 05:10:22 pm

Quote from: Ivoah on May 19, 2016, 04:50:55 pm
OS version shouldn't matter, so long as it runs Ndless.

Ok, good; 3.9.1 was giving me a headache. So far, debootstrapping surprisingly seems to be working! Hopefully one last question: since I'm running Lububtu, will the sources.list need to be changed?

I don't think so. Seeing as you're putting debian, not lubuntu, on the flash drive

kitten · « **Reply #36 on:** May 19, 2016, 06:19:26 pm »

Quote from: Ivoah on May 19, 2016, 05:51:33 pm

I don't think so. Seeing as you're putting debian, not lubuntu, on the flash drive

What I meant was because the guide asks me to copy the sources.list from the Linux installation on the computer (lubuntu) to the installation on the USB (debian), I thought there might be some conflicts between source domains.

Ivoah · « **Reply #37 on:** May 19, 2016, 06:55:56 pm »

Quote from: kitten on May 19, 2016, 06:19:26 pm

Quote from: Ivoah on May 19, 2016, 05:51:33 pm
I don't think so. Seeing as you're putting debian, not lubuntu, on the flash drive

What I meant was because the guide asks me to copy the sources.list from the Linux installation on the computer (lubuntu) to the installation on the USB (debian), I thought there might be some conflicts between source domains.

Oh huh, I thought that my instructions said to download the sources.list from my site. ¯\_(ツ)_/¯ Could you post the contents of your sources.list?

kitten · « **Reply #38 on:** May 19, 2016, 07:01:05 pm »

Quote from: Ivoah on May 19, 2016, 06:55:56 pm

Oh huh, I thought that my instructions said to download the sources.list from my site. ¯\_(ツ)_/¯ Could you post the contents of your sources.list?

Sure:

Code: [Select]

#deb cdrom:[Lubuntu 16.10 _Yakkety Yak_ - Alpha amd64 (20160424)]/ yakkety main multiverse restricted universe

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://us.archive.ubuntu.com/ubuntu/ yakkety main restricted
# deb-src http://us.archive.ubuntu.com/ubuntu/ yakkety main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://us.archive.ubuntu.com/ubuntu/ yakkety-updates main restricted
# deb-src http://us.archive.ubuntu.com/ubuntu/ yakkety-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://us.archive.ubuntu.com/ubuntu/ yakkety universe
# deb-src http://us.archive.ubuntu.com/ubuntu/ yakkety universe
deb http://us.archive.ubuntu.com/ubuntu/ yakkety-updates universe
# deb-src http://us.archive.ubuntu.com/ubuntu/ yakkety-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
## team, and may not be under a free licence. Please satisfy yourself as to 
## your rights to use the software. Also, please note that software in 
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://us.archive.ubuntu.com/ubuntu/ yakkety multiverse
# deb-src http://us.archive.ubuntu.com/ubuntu/ yakkety multiverse
deb http://us.archive.ubuntu.com/ubuntu/ yakkety-updates multiverse
# deb-src http://us.archive.ubuntu.com/ubuntu/ yakkety-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://us.archive.ubuntu.com/ubuntu/ yakkety-backports main restricted universe multiverse
# deb-src http://us.archive.ubuntu.com/ubuntu/ yakkety-backports main restricted universe multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu yakkety partner
# deb-src http://archive.canonical.com/ubuntu yakkety partner

deb http://security.ubuntu.com/ubuntu yakkety-security main restricted
# deb-src http://security.ubuntu.com/ubuntu yakkety-security main restricted
deb http://security.ubuntu.com/ubuntu yakkety-security universe
# deb-src http://security.ubuntu.com/ubuntu yakkety-security universe
deb http://security.ubuntu.com/ubuntu yakkety-security multiverse
# deb-src http://security.ubuntu.com/ubuntu yakkety-security multiverse

Ivoah · « **Reply #39 on:** May 19, 2016, 07:12:46 pm »

Ah yeah, that won't work. Try this instead

Code: [Select]

deb http://ftp.us.debian.org/debian/ jessie main
deb-src http://ftp.us.debian.org/debian/ jessie main

deb http://security.debian.org/ jessie/updates main
deb-src http://security.debian.org/ jessie/updates main

# jessie-updates, previously known as 'volatile'
deb http://ftp.us.debian.org/debian/ jessie-updates main
deb-src http://ftp.us.debian.org/debian/ jessie-updates main

kitten · « **Reply #40 on:** May 19, 2016, 07:17:53 pm »

Quote from: Ivoah on May 19, 2016, 07:12:46 pm

Ah yeah, that won't work. Try this instead

Thanks, I set up a blank sources.list on my desktop, pasted all that in, set it to chmod 755 just in case, and copied it to the USB. I'm finishing debootstrapping now, hopefully it works!

EDIT: It did not work.

It failed on step 12; I get this:

Code: [Select]

Linux in-place bootloader v2 (ba0d0fa)
Build date: Sun, 23 Feb 2014 19:18:37 +0100
Allocated memory:
   DTB/ATAGs:             16128 bytes
   Kernel and initrd:     26804224 bytes
Machine number: 4443
Detected a CX
Physical memory at: 0x10000000-0x14000000
Serial number: 3fce820120 rev0 (Non-CAS)
kernel linux/zImage.tns
Kernel successfully loaded
cmdline root=/dev/sda1
Kernel command line: "root=/dev/sda1"
rootdelay=10
Unknown command
boot

I then have to restart my calculator to do anything else. Please, help would be appreciated. Thank you.

Ivoah · « **Reply #41 on:** May 19, 2016, 09:07:33 pm »

Quote from: kitten on May 19, 2016, 07:17:53 pm

Quote from: Ivoah on May 19, 2016, 07:12:46 pm
Ah yeah, that won't work. Try this instead

Thanks, I set up a blank sources.list on my desktop, pasted all that in, set it to chmod 755 just in case, and copied it to the USB. I'm finishing debootstrapping now, hopefully it works!

EDIT: It did not work. It failed on step 12; I get this:

Code: [Select]
Linux in-place bootloader v2 (ba0d0fa) Build date: Sun, 23 Feb 2014 19:18:37 +0100 Allocated memory: DTB/ATAGs: 16128 bytes Kernel and initrd: 26804224 bytes Machine number: 4443 Detected a CX Physical memory at: 0x10000000-0x14000000 Serial number: 3fce820120 rev0 (Non-CAS) kernel linux/zImage.tns Kernel successfully loaded cmdline root=/dev/sda1 Kernel command line: "root=/dev/sda1" rootdelay=10 Unknown command boot
I then have to restart my calculator to do anything else. Please, help would be appreciated. Thank you.

Well, your post made me realize that I never updated my tutorial for the new dtb kernel.

The updated instructions are here: http://ivoah.net/blog/2016/03/20/how-to-install-debian-on-a-ti-nspire/

kitten · « **Reply #42 on:** May 20, 2016, 06:47:02 am »

Quote from: Ivoah on May 19, 2016, 09:07:33 pm

Well, your post made me realize that I never updated my tutorial for the new dtb kernel.
The updated instructions are here: http://ivoah.net/blog/2016/03/20/how-to-install-debian-on-a-ti-nspire/

So, I should restart the tutorial from the beginning?
Yay... $:-\$

EDIT: So, after actually reading the tutorial, it seems I only need to change the files on the calculator.

EDIT2: It worked!

Thank you for all your help! Also, one last suggestion for the tutorial: maybe you should tell the reader to rename the DTB to have a .tns extension at the end?
EDIT3: Today, I have learned something valuable: my USB-OTG is really not so good. Most of the time, it kernel panics because it can't find the rootfs. However, sometimes, it does load to the login prompt. Although, I can not login, no matter what combination of usernames/passwords I use. Is there a specific username to use? I have set a password in the guide. Thanks.

Ivoah · « **Reply #43 on:** May 20, 2016, 09:16:39 am »

Quote from: kitten on May 20, 2016, 06:47:02 am

Quote from: Ivoah on May 19, 2016, 09:07:33 pm
Well, your post made me realize that I never updated my tutorial for the new dtb kernel.
The updated instructions are here: http://ivoah.net/blog/2016/03/20/how-to-install-debian-on-a-ti-nspire/

So, I should restart the tutorial from the beginning?
Yay...

EDIT: So, after actually reading the tutorial, it seems I only need to change the files on the calculator.
EDIT2: It worked! Thank you for all your help! Also, one last suggestion for the tutorial: maybe you should tell the reader to rename the DTB to have a .tns extension at the end?
EDIT3: Today, I have learned something valuable: my USB-OTG is really not so good. Most of the time, it kernel panics because it can't find the rootfs. However, sometimes, it does load to the login prompt. Although, I can not login, no matter what combination of usernames/passwords I use. Is there a specific username to use? I have set a password in the guide. Thanks.

First, yay! I'm glad it finally worked

Yeah, I forgot that it doesn't have the tns extension. Actually, I think I'll say to rename it to just 'nspire.dtb.tns' so that they don't need to change the boot script.
About your not being able to type issue, make sure not to touch the touchpad after you launch the start_usb script. For some reason it'll break the keyboard in linux. Once it's all booted up though you should be able to touch it again.
And lastly, thanks for using my tutorial, and showing me where I needed to update it.

kitten · « **Reply #44 on:** May 20, 2016, 09:41:45 am »

Quote from: Ivoah on May 20, 2016, 09:16:39 am

First, yay! I'm glad it finally worked
Yeah, I forgot that it doesn't have the tns extension. Actually, I think I'll say to rename it to just 'nspire.dtb.tns' so that they don't need to change the boot script.
About your not being able to type issue, make sure not to touch the touchpad after you launch the start_usb script. For some reason it'll break the keyboard in linux. Once it's all booted up though you should be able to touch it again.
And lastly, thanks for using my tutorial, and showing me where I needed to update it.

Not being able to type? Well, I can type, but that bit about the touchpad is interesting. What my problem is I can't figure out what the username and password are. I tried root/toor, root/(password I set in the tutorial), (blank)/root, (blank)/(password I set in the tutorial), and I have no name!/(password I set in the tutorial). Is there an emergency login I can use?

Also, you're welcome

Author Topic: Peripheral Not Identified (Read 37588 times)

kitten

Re: Peripheral Not Identified

Ivoah

Re: Peripheral Not Identified

kitten

Re: Peripheral Not Identified

Ivoah

Re: Peripheral Not Identified

kitten

Re: Peripheral Not Identified

Ivoah

Re: Peripheral Not Identified

kitten

Re: Peripheral Not Identified

Ivoah

Re: Peripheral Not Identified

kitten

Re: Peripheral Not Identified

Ivoah

Re: Peripheral Not Identified

kitten

Re: Peripheral Not Identified

Ivoah

Re: Peripheral Not Identified

kitten

Re: Peripheral Not Identified

Ivoah

Re: Peripheral Not Identified

kitten

Re: Peripheral Not Identified