Author Topic: Rush Hour (Read 27205 times)

DJ Omnimaga · « **Reply #30 on:** February 26, 2012, 08:44:07 pm »

Hmm an Axe clone would be nice I guess, unless there is already a very good ASM version for the 83+ series that would be hard to match in Axe.

Jonius7 · « **Reply #31 on:** February 26, 2012, 08:46:03 pm »

I'll give you some of the harder level 5 levels. I'll do it when I get home today.
I dunno what I can really do in Axe, tho I had some ideas thinking about it.

cyanophycean314 · « **Reply #32 on:** February 26, 2012, 09:11:40 pm »

I think there already is a version for the 84, but I'm not sure what language it's from. That was where I got the inspiration to write this version.

Jonius7 · « **Reply #33 on:** February 27, 2012, 08:16:03 pm »

Sorry, I found my handheld, but didn't get time to write down the levels from it. Shall do it today,(hopefully

)

cyanophycean314 · « **Reply #34 on:** February 27, 2012, 08:48:58 pm »

Ok. btw, you have 999 posts!

Jonius7 · « **Reply #35 on:** February 27, 2012, 11:27:15 pm »

Yeah, 1000 and 1 now. I did some experiments, and got to 1000 posts, set my custom title and deleted a post. My custom title was still there! http://ourl.ca/153285

AzNg0d1030 · « **Reply #36 on:** February 28, 2012, 06:42:01 pm »

Don't go off topic guys

Jonius7 · « **Reply #37 on:** February 28, 2012, 08:24:07 pm »

Technicially you're going off topic by telling us not to go off topic

jks.

I have some levels but am busy right now and can't post them here. After I finish schoolwork today.

Jonius7 · « **Reply #38 on:** February 29, 2012, 07:01:30 am »

I have some levels for you cyano,
I have taken these from Rush Hour electronic Handheld, Level 5 Difficultly. I have drawn 8 of these levels up here. Sorry they are really crude (Just lines and some boxes) but hope you can understand them.
The arrows mean the direction the car must go in/where the exit is located.
Enjoy!

cyanophycean314 · « **Reply #39 on:** February 29, 2012, 07:26:16 pm »

Thank you! They are a bit messy, but I'll take care of converting them and finishing up all 60 levels! Thank you Jonius7.

Btw, saving has been implemented, but have not had opportunity to test because nspire_emu and Student Software both hate me right now.

Jonius7 · « **Reply #40 on:** February 29, 2012, 11:30:05 pm »

What's wrong with nspire_emu?
Also if you need any other levels, feel free to ask.
From the 5 difficulty levels.

And I know about the original rush hour board game style version had a card pack, and at least 4 purchasable card packs with extra levels.

EDIT: I also realised that you had 51 levels already! Then the 8 I gave you should finish it off nicely.
EDIT2: Do you have a credits page of some sort?

cyanophycean314 · « **Reply #41 on:** March 01, 2012, 05:49:15 pm »

Right now, I can't get Nspire_emu to start up after Student Software exploded. I've been following instructions as posted here http://ourl.ca/13290/247912 and I have everything done except the last two steps. When I type the first one in, it gives me the regular command list output. I think it should create the flash.bin, but it doesn't. When I then type in the second command, it says flash.bin wasn't found. I got it to run once, but then it screwed up at installing factory image. Now it won't even start up

A credits page? I'll be sure to add one and include you in it. Don't worry, you shall be recognized.

Jonius7 · « **Reply #42 on:** March 02, 2012, 04:40:46 am »

Are you using nspire_emu_060? If so then Goplat has changed some commands and commands that worked in <0.53 may not work now.
EDIT: Hmm I see yes that post you showed me is for nspire_emu_053. Things have changed in 060. I believe that the TI-nspire Emulator thread here on Omnimaga has more information, somewhere in the middle of the thread. http://ourl.ca/9360;action=printpage
I am also creating batch files (edited from Levak's ones) for the new version so there won't be the big hassle of command line stuff.

Quick thing though, /N will not do you any good in 060. It does not create a rom file anymore.
Also .bin files are different only if you want to use boot1 (with boot2)
.bin files are hard to dump/get, as they are illegal to get from other people, and you need an actual calc connected to dump boot1.

But they are required to emulate a CX.

Also, have you ever made nspire_emu work before?
I know it can be quite confusing, very confusing in fact. I hope to change that with some tutorials somewhere.

cyanophycean314 · « **Reply #43 on:** March 02, 2012, 04:52:24 pm »

I got nspire_emu working! THANK YOU SO MUCH! Somebody should either A) Put that tutorial hidden in the post in the tutorials section or B) include a readme with the file. Maybe I'll do that if I have time. Now development shall continue!

Jonius7 · « **Reply #44 on:** March 02, 2012, 11:05:36 pm »

Yay woohoo!
Yeah, there definitely there should be a readme of some sort, especially with all the changes in 060, however Goplat just seems to provide us with the source code and executable only.
EDIT: At 1000 posts I think your tutorials get approved automatically. Otherwise an admin will do it for you.

Author Topic: Rush Hour (Read 27205 times)

DJ Omnimaga

Re: Rush Hour

Jonius7

Re: Rush Hour

cyanophycean314

Re: Rush Hour

Jonius7

Re: Rush Hour

cyanophycean314

Re: Rush Hour

Jonius7

Re: Rush Hour

AzNg0d1030

Re: Rush Hour

Jonius7

Re: Rush Hour

Jonius7

Re: Rush Hour

cyanophycean314

Re: Rush Hour

Jonius7

Re: Rush Hour

cyanophycean314

Re: Rush Hour

Jonius7

Re: Rush Hour

cyanophycean314

Re: Rush Hour

Jonius7

Re: Rush Hour