how about have the number keys also fire paint?

I found a bug!
TAG doesn't delete the temporary appvar it creates once it finishes, instead leaving it in RAM

I think it does that to save which level it's completed to.  I could be wrong tho.

Speaking of saving, after I beat the game and went to suit, it tried to save and crashed.

Nope. I deleted it, and it still opened up at the level I was at.

Now in progress. Exciting stuff.

For those people that absolutely can't wait for the next build to test their levels - there's hope!
If you open up TAGLEV, that's where all the data is stored. You can make your own maps by replacing the ones there.

But how, you ask?

Tiles:
0 - empty tile
1 - place player starting position
2 - place box
3 - place exit
4 - floor spikes
5 - left spikes
6 - right spikes
7 - ceiling spikes
8 - unpaintable tile
9 - normal tile
A - bounce tile
B - speed tile
C - arrow tile (underneath switches)
D - left flinging catapult (Place on the tile underneath the actual flingy thing)
E - right flinging catapult (Place on the tile underneath the actual flingy thing)

Door and switch info:

Right after the tilemap, you'll have a byte that dictates how many door/switch pairs are in the level. THIS BYTE IS MANDATORY, EVEN IF YOU MUST PUT 00.

E.g.,
[tilemapstuff
[00

To add doors and switches, you use the following format:

[switchx][switchy][doorx][doory][doorwidth,doorheight][opening direction]

Switch position and door positions are zero-indexed - that is, the top leftmost tile is 0,0. Count accordingly. Door width and door height are not zero-indexed.
Switch position refers to the block under where the switch appears. Door position refers to the top leftmost tile of the door.
Opening direction is as follows:
1: Door opens down
2: Door opens left
3: Door opens right
4: Door opens up

For example, if I wanted to add 1 switch/door pair with the following attributes:
Switchx: 7
Switchy: 11
Doorx: 14
Doory: 2
Doorwidth: 5
Doorheight: 1
Opening direction: Up

The map info would look like this:

[tilemap->GDB1
[01
[070B0E025104

Simple enough. If you need sample maps, check TAGLEV, where the levels are stored. Good luck and happy mapping ^^
BTW, there is going to be a level editor.

where is the fixed controls version?

btw als thsoe boxes get stuck between that bounce level when you need to go to a button to release the box,
if i release too soon it gets stuck?

Ok so here's the compilation of bugs and future corrections. If anyone wants to add anything just add it to the typewithme: http://typewith.me/mqtWFOuVhD

there is says the button layout is changed,
but i still only can use the old configuration.

Okay triple post! I've fully fixed the box glitch where boxes would get stuck in walls/floors and not react properly to bouncy gel, and I've implemented the transparent pause screen.

and that bug still happens at mine..

Played it on a real calculator for the first time today, and I gotta say -- this is the single most epic game I've ever seen on a TI-83 Plus.