Author Topic: TRAXE2 chiptune tracker (Read 15291 times)

sqrt(Time) · « **Reply #15 on:** September 24, 2011, 01:00:24 pm »

Any chance of Still Alive? I've always wanted a good quality (but not as big as RealSound) version of that one...

Keoni29 · « **Reply #16 on:** September 24, 2011, 01:45:59 pm »

Experimenting with pulse width modulation. It seems that axe is not powerfull enough to produce a sine, but customduty cycles are possible. I made a vid. See video 03 in the startpost

Keoni29 · « **Reply #17 on:** September 25, 2011, 03:33:50 am »

Working on sound blending using pulse width modulation. In the beginpost you can find a link to a work in progress version of the kirby's dreamland song. It's not recorded from the calculator.

Quigibo · « **Reply #18 on:** September 25, 2011, 04:59:09 am »

It should be fast enough to generate PWM sine waves if you use pregenerated look-up tables for the pulse times and delays instead of doing it on the fly.

You might want to check this out too, this was made from a very old version of Axe before the optimized For(const) loops:
http://ourl.ca/6372

Keoni29 · « **Reply #19 on:** September 25, 2011, 08:22:30 am »

What do you mean? I thought of voltage regulation with pwm and wave tables.

Keoni29 · « **Reply #20 on:** September 25, 2011, 10:36:32 am »

This is the sequence editor. You type in the adress of a certain pattern. It needs lots of optimization.

Keoni29 · « **Reply #21 on:** October 28, 2011, 05:11:24 am »

Demo of infinite musical notes. Uses only 425 bytes to produce this sound and it can be optimized a lot by removing the gfx
http://www.speedyshare.com/files/30959702/2011-10-28_11-06-12.mp3

Builderboy · « **Reply #22 on:** October 28, 2011, 05:55:05 am »

You know you can host files on Omni itself, that way you don't have to upload them at other sites

Keoni29 · « **Reply #23 on:** October 28, 2011, 05:56:26 am »

I used it for the IRC, so I just recycled the url

Edit: Working functions:
Duration:0x determines the duration of each note
Rest:1x rest x+1 durations
Arp:20 -- -- takes the next two notes and alternates them rapidly
Note:xy with x[3,E] y[0,6] plays note x with octave y

Tested and works perfectly

Netham45 · « **Reply #24 on:** October 28, 2011, 06:30:53 am »

The lost forest song in OoT. Do it.

Keoni29 · « **Reply #25 on:** October 28, 2011, 06:34:29 am »

Possible, but I dont support multiple channels yet, so it will be a lot of arpeggio's

I have to make a small tracker in order to do that

Keoni29 · « **Reply #26 on:** October 28, 2011, 01:05:26 pm »

The tracker will look like this. Just a row of commands:
<P00> SQ DR4 01 [C-2] 00 .-0 02 B-3 03 AR2 04 B-3 00 B-4 01

Maybe a fulture idea: Sound blending!
________ _________ | | |__________| and ___ ____ ____ |____| |____| |____| Makes ___ _ _ _ _ ____ _ _ _ | _ _| _ _|____| | _ _

Keoni29 · « **Reply #27 on:** November 25, 2011, 01:59:05 pm »

Planned feature: Effects
3x (yz) in which x is the effect type and y and z the parameters.
x= 0:Reset defaults 1:Delay/Release (y=delay z=release) 2:Noisedrums (y=delay between noise drums; z=on/off) 3:SweepUp (yz=time) 4:SweepDown (yz=time)

Suggestions?

Yeong · « **Reply #28 on:** November 26, 2011, 07:49:55 am »

how about tremolo and glissando effects?

Keoni29 · « **Reply #29 on:** December 09, 2011, 03:00:27 pm »

I'm working on a tracker right now

Author Topic: TRAXE2 chiptune tracker (Read 15291 times)

sqrt(Time)

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Quigibo

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Builderboy

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Netham45

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine

Yeong

Re: TI Real Chipsound engine

Keoni29

Re: TI Real Chipsound engine