Author Topic: YAMGT (Read 97419 times)

Munchor · « **Reply #60 on:** December 01, 2010, 06:43:51 pm »

Quote from: Darl181 on December 01, 2010, 06:39:34 pm

The second screenshot waits until the person press any key, and if it's not 2, 3 or 4, it quits.
The menu is planned, I just did the thing in the second one to clarify which mode went with which type.

It looks like I'll have to change the code so it redraws everything every frame, unless there's a way to do two extra buffers or store a greyscale background externally...
Or i can have it xor the balls back into nothing, I'm trying to think of a fast way to do it so what happened to TWHG (3-4 giant loops per frame) won't happen to this.

Update: I just need to fix the display issue ↑, involve an appvar and put the game in the menu.
The bar on top is done with, it slowed it down too much (now with greyscale and such) and it interfered with the design of the 3-type/4-type fields. It looks a lot cleaner without it.
(One would hope the person would know when they're close to winning, anyway )

That looks close. Putting the game in the menu doesn't look hard, the Appvar not too.

EDIT: grayscale was not really needed, I think

Darl181 · « **Reply #61 on:** December 01, 2010, 06:49:33 pm »

Greyscale is needed to allow for more than two types unless different sprites were used, then it would be hard to tell what type is what because they're moving.

"was not"...it is now

squidgetx · « **Reply #62 on:** December 01, 2010, 07:23:58 pm »

As for having a space for two more buffers, you can just create a temporary appvar at the beginning of your game: GetCalc("appvTemp",1536)->P To copy to these 3rd and 4th buffers, you could do Copy(L6,P,768):Copy(L3,P+768,768) to save the both the buffer and backbuffer to these buffers. you can also use the pt-on/off/change/mask commands to these buffers with Pt-On(Y,X,Pic)->P for normal and Pt-On(Y,X,Pic)->P+768 for grayscale

Darl181 · « **Reply #63 on:** December 01, 2010, 08:01:40 pm »

How would I recall it, without it overwriting what's currently there?
Would it be something like this...

Code: [Select]

GetCalc("TempBuff",1536)→P
For(A,0,767
!If {P+A}
{P+A}→{L6+A}
.or
.{P+A+768}→{L3+A}
End
End
DispGraph
.or with r or rr modifiers

...?

squidgetx · « **Reply #64 on:** December 01, 2010, 08:37:23 pm »

So you would want to do something similar to TI-BASIC RecallPic, where it writes whats on the 3rd/4th buffer to what's on the screen?

Code: [Select]

.# represents the 16-bit or operation
L₆→A
While -768-L₆
{A}ʳ#{A+P-L₆}ʳ→{A}ʳ+1→A
End

and repeat subbing in L3 for L6 and P+768 for P for the backbuffer

Darl181 · « **Reply #65 on:** December 01, 2010, 08:43:10 pm »

Umm...what?
Might you be able to explain how that works, please?

squidgetx · « **Reply #66 on:** December 01, 2010, 08:50:51 pm »

lol, sorry if I wasn't too clear.

The code is some crazy optimized thing that Quigibo came up with so I'm not too sure why it works either :x. But what it will do is take the buffer located at P and 'or' it over what's on the screen (in L6), just like how in BASIC you can do 'recallpic 1' and it will draw Pic 1 over what's already on the screen (which is what I think you're trying to do, right?)

Darl181 · « **Reply #67 on:** December 01, 2010, 09:35:30 pm »

I thought it kind of looked familiar...

Would the code I came up with earlier work?
Or is there something wrong with it?

DJ Omnimaga · « **Reply #68 on:** December 01, 2010, 11:38:39 pm »

Quote from: Darl181 on December 01, 2010, 06:39:34 pm

The second screenshot waits until the person press any key, and if it's not 2, 3 or 4, it quits.
The menu is planned, I just did the thing in the second one to clarify which mode went with which type. In the menu, it's determined by the option "Types of balls".

It looks like I'll have to change the code so it redraws everything every frame, unless there's a way to do two extra buffers or store a greyscale background externally...
Or i can have it xor the balls back into nothing, I'm trying to think of a fast way to do it so what happened to TWHG (3-4 giant loops per frame) won't happen to this.

Update: I just need to fix the display issue ↑, involve an appvar and put the game in the menu.
The bar on top is done with, it slowed it down too much (now with greyscale and such) and it interfered with the design of the 3-type/4-type fields. It looks a lot cleaner without it.
(One would hope the person would know when they're close to winning, anyway )

I see, good luck. For extra buffers you can add a buffer at the end of your game, but that means the game would be 768 bytes larger for each additional screen buffers.

Darl181 · « **Reply #69 on:** December 02, 2010, 06:33:21 pm »

Unexpected setback.
For some reason, Calcutil's screwed up big-time and pretty much every ASM program or archived program (read: source) run from the homescreen throws "ERR: UNDEFINED". At this point, I've pretty much given up on trying to figure out wtf is going on, just get everything off of it and re-send the OS. The programs aren't lost, they just don't run from outside of a shell (I've been trying all day, so yeah

)...

On an unrelated note, the alt text for this smiley

from the Post Reply window contains quite the bold statement. And I lost.

DJ Omnimaga · « **Reply #70 on:** December 03, 2010, 01:57:38 am »

Can they be recovered with something like CalcSys?

I hope you don't lose any progress due to corruption or something. Either way don't give up on this project. Do you have any backups on a computer or something?

Darl181 · « **Reply #71 on:** December 03, 2010, 02:05:54 am »

The programs aren't corrupted, they just don't run.
The OS is corrupted. What I need to be is get everything off the calc (backup), re-send the OS, restore the stuff, and get back on my feet with this stuff.

Which brings me to my next question. 84PBE. Extra RAM pages. Need to backup to re-send OS. TiLP's built-in backup feature doesn't work (idk why).

...Need backup utility.
Are there any good for the purpose?

DJ Omnimaga · « **Reply #72 on:** December 03, 2010, 02:16:51 am »

Oh do you mean Asm(prgmNAME) just says Done? I had this happen before and I had to clear the entire mem

As for backup utilities I'm not too sure. Do you mean you may not be able to send the files to your comp?

Darl181 · « **Reply #73 on:** December 03, 2010, 02:22:10 am »

It doesn't say done, it says ERR:UNDEFINED.
Another thing. Every time it does that, about 2K of RAM disappears.

OS is definitely corrupted. Just tried graphing Y=2 and it just showed the run indicator on top. For minutes on end.

I'll probably be able to send stuff (MSD8X works) I'm just trying to think of a simple and practical way to do it.

DJ Omnimaga · « **Reply #74 on:** December 03, 2010, 03:08:55 am »

Wow, that seems really bad. I would avoid running anything at all costs. You will have to re-install the OS, hoping you're not facing any linking issues like ASHBAD_ALVIN did...

Author Topic: YAMGT (Read 97419 times)

Munchor

Re: "Maxwell's Demon" Port (Axe)

Darl181

Re: "Maxwell's Demon" Port (Axe)

squidgetx

Re: "Maxwell's Demon" Port (Axe)

Darl181

Re: "Maxwell's Demon" Port (Axe)

squidgetx

Re: "Maxwell's Demon" Port (Axe)

Darl181

Re: "Maxwell's Demon" Port (Axe)

squidgetx

Re: "Maxwell's Demon" Port (Axe)

Darl181

Re: "Maxwell's Demon" Port (Axe)

DJ Omnimaga

Re: "Maxwell's Demon" Port (Axe)

Darl181

Re: "Maxwell's Demon" Port (Axe)

DJ Omnimaga

Re: "Maxwell's Demon" Port (Axe)

Darl181

Re: "Maxwell's Demon" Port (Axe)

DJ Omnimaga

Re: "Maxwell's Demon" Port (Axe)

Darl181

Re: "Maxwell's Demon" Port (Axe)

DJ Omnimaga

Re: "Maxwell's Demon" Port (Axe)