Author Topic: zStart - an app that runs on ram clears (Read 334506 times)

thepenguin77 · « **Reply #900 on:** May 07, 2013, 06:20:34 pm »

Quote from: fortytwo on May 07, 2013, 04:58:11 pm

Could you have the lowercase alpha enabled as an option? I hardly ever use it, and it is annoying to have to hit alpha twice to cancel instead of just once.

I had it on permanently instead of as an option so that it wouldn't slow down the calculator. I re-enable lower case every time you press a button, so checking the option has to happen almost instantly. But, I looked around, and I found a spot in my ram appvar where I could put the flag. So, I should be able to add that option in.

Freyaday · « **Reply #901 on:** May 08, 2013, 12:17:53 am »

Quote from: thepenguin77 on May 07, 2013, 06:20:34 pm

Quote from: fortytwo on May 07, 2013, 04:58:11 pm
Could you have the lowercase alpha enabled as an option? I hardly ever use it, and it is annoying to have to hit alpha twice to cancel instead of just once.

I had it on permanently instead of as an option so that it wouldn't slow down the calculator. I re-enable lower case every time you press a button, so checking the option has to happen almost instantly. But, I looked around, and I found a spot in my ram appvar where I could put the flag. So, I should be able to add that option in.

Why do you set it at every keypress?

thepenguin77 · « **Reply #902 on:** May 08, 2013, 10:02:18 pm »

Quote from: Freyaday on May 08, 2013, 12:17:53 am

Quote from: thepenguin77 on May 07, 2013, 06:20:34 pm
Quote from: fortytwo on May 07, 2013, 04:58:11 pm
Could you have the lowercase alpha enabled as an option? I hardly ever use it, and it is annoying to have to hit alpha twice to cancel instead of just once.

I had it on permanently instead of as an option so that it wouldn't slow down the calculator. I re-enable lower case every time you press a button, so checking the option has to happen almost instantly. But, I looked around, and I found a spot in my ram appvar where I could put the flag. So, I should be able to add that option in.
Why do you set it at every keypress?

Well, the main reason is because I don't really know when else to do it. The trouble is that if an app disables it, I'm not sure when it will get re-enabled. That's why I do it on every keypress.

Runer112 · « **Reply #903 on:** May 09, 2013, 03:23:25 pm »

I don't actually need this feature myself, but a user asked in a topic on Cemetech how to disable APD. Perhaps disabling APD is a feature that would fit well into zStart?

Streetwalrus · « **Reply #904 on:** May 09, 2013, 03:31:31 pm »

I found a bug today. You can't set a program with theta in it's name to run on RAM clear/turn on/zStart quit/on + num. In the zStart GUI, the theta shows up as U and this prevents the program from being found and run.

thepenguin77 · « **Reply #905 on:** May 09, 2013, 05:10:59 pm »

Quote from: Runer112 on May 09, 2013, 03:23:25 pm

I don't actually need this feature myself, but a user asked in a topic on Cemetech how to disable APD. Perhaps disabling APD is a feature that would fit well into zStart?

That should be pretty easy. I can do that at the same time I do lowercase.

Quote from: Streetwalker on May 09, 2013, 03:31:31 pm

I found a bug today. You can't set a program with theta in it's name to run on RAM clear/turn on/zStart quit/on + num. In the zStart GUI, the theta shows up as U and this prevents the program from being found and run.

I forgot about theta, I have to admit though that I don't think this is a fixable problem. When I store the names of programs, I compress them to 6 bits per character. If you account for lower case, upper case, and numbers, that leaves me with 2 extra characters. I gave one of those to space and the other to zero (actual zero, not ascii 0). So, I hate to say it, but you'll probably just have to rename whatever you want to use.

Runer112 · « **Reply #906 on:** May 09, 2013, 05:16:11 pm »

Quote from: thepenguin77 on May 09, 2013, 05:10:59 pm

Quote from: Runer112 on May 09, 2013, 03:23:25 pm
I don't actually need this feature myself, but a user asked in a topic on Cemetech how to disable APD. Perhaps disabling APD is a feature that would fit well into zStart?

That should be pretty easy. I can do that at the same time I do lowercase.

And hopefully it'll be an option?

Quote from: thepenguin77 on May 09, 2013, 05:10:59 pm

Quote from: Streetwalker on May 09, 2013, 03:31:31 pm
I found a bug today. You can't set a program with theta in it's name to run on RAM clear/turn on/zStart quit/on + num. In the zStart GUI, the theta shows up as U and this prevents the program from being found and run.

I forgot about theta, I have to admit though that I don't think this is a fixable problem. When I store the names of programs, I compress them to 6 bits per character. If you account for lower case, upper case, and numbers, that leaves me with 2 extra characters. I gave one of those to space and the other to zero (actual zero, not ascii 0). So, I hate to say it, but you'll probably just have to rename whatever you want to use.

What's space for?

Streetwalrus · « **Reply #907 on:** May 09, 2013, 05:35:44 pm »

Yeah that's what I did. Thanks for the info !

Freyaday · « **Reply #908 on:** May 09, 2013, 05:47:42 pm »

Quote from: Runer112 on May 09, 2013, 05:16:11 pm

Quote from: thepenguin77 on May 09, 2013, 05:10:59 pm
Quote from: Runer112 on May 09, 2013, 03:23:25 pm
I don't actually need this feature myself, but a user asked in a topic on Cemetech how to disable APD. Perhaps disabling APD is a feature that would fit well into zStart?

That should be pretty easy. I can do that at the same time I do lowercase.

And hopefully it'll be an option?

Quote from: thepenguin77 on May 09, 2013, 05:10:59 pm
Quote from: Streetwalker on May 09, 2013, 03:31:31 pm
I found a bug today. You can't set a program with theta in it's name to run on RAM clear/turn on/zStart quit/on + num. In the zStart GUI, the theta shows up as U and this prevents the program from being found and run.

I forgot about theta, I have to admit though that I don't think this is a fixable problem. When I store the names of programs, I compress them to 6 bits per character. If you account for lower case, upper case, and numbers, that leaves me with 2 extra characters. I gave one of those to space and the other to zero (actual zero, not ascii 0). So, I hate to say it, but you'll probably just have to rename whatever you want to use.

What's space for?

That is a good question.

Streetwalrus · « **Reply #909 on:** May 09, 2013, 05:55:36 pm »

Apps I guess.

Runer112 · « **Reply #910 on:** May 09, 2013, 05:59:11 pm »

Oh yeah, I guess applications could explain his support of lowercase letters, which completely didn't register with me when I read his post originally. But applications can actually have all sorts of characters in their names; I think just about any defined character is fair game. I know most applications only use the characters he listed, but certainly not all of them. If he wants to support applications, he should really toss out the bit-packing altogether.

Matrefeytontias · « **Reply #911 on:** May 10, 2013, 04:59:32 am »

Speaking of non-conventional characters, see Batlib.

thepenguin77 · « **Reply #912 on:** May 10, 2013, 10:03:13 am »

Quote from: Runer112 on May 09, 2013, 05:59:11 pm

Oh yeah, I guess applications could explain his support of lowercase letters, which completely didn't register with me when I read his post originally. But applications can actually have all sorts of characters in their names; I think just about any defined character is fair game. I know most applications only use the characters he listed, but certainly not all of them. If he wants to support applications, he should really toss out the bit-packing altogether.

Yes, correct on the spaces. And, it would be great to allow all letters, but changing that would probably use up the remaining space in the app. The reason for this is that I would have to make a new appvar revision as well as duplicate a bunch of routines to not use the compacting.

Besides, the only app I can think of that uses a non-standard character is Start-Up. And, while running Start-Up on Start-Up would be a little ironic, I don't think anyone is going to do that.

Runer112 · « **Reply #913 on:** May 10, 2013, 03:54:40 pm »

I can't turn my calculator into a Gameboy by making Pokémon run on startup?

So why couldn't you just scrap the old methods and appvars for the new? I don't think any really important data would be lost if you had to delete the existing settings appvar, the user would just have to take a minute or two to review their settings. Possibly a good idea anyways to have users review it all, with new features.

Freyaday · « **Reply #914 on:** May 10, 2013, 06:12:04 pm »

How would I turn the fonts I have as programs into appvars?

Author Topic: zStart - an app that runs on ram clears (Read 334506 times)

thepenguin77

Re: zStart - an app that runs on ram clears

Freyaday

Re: zStart - an app that runs on ram clears

thepenguin77

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears

Streetwalrus

Re: zStart - an app that runs on ram clears

thepenguin77

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears

Streetwalrus

Re: zStart - an app that runs on ram clears

Freyaday

Re: zStart - an app that runs on ram clears

Streetwalrus

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears

Matrefeytontias

Re: zStart - an app that runs on ram clears

thepenguin77

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears

Freyaday

Re: zStart - an app that runs on ram clears