Author Topic: zStart - an app that runs on ram clears (Read 334551 times)

Hayleia · « **Reply #1110 on:** March 13, 2014, 03:09:10 pm »

Quote from: Sorunome on March 13, 2014, 01:27:55 pm

Seing that both are full apps, I doubt the space will be enough to put them into zStart.

They are not full apps, there is always some unused space. That's how Kerm managed to put a lot of apps (like Celtic III, MirageOS, etc) plus new features in 3 pages only (I only think that most features are useless, as opposed to zStart's features).

However, while MirageOS libs seems to me like a very good idea to add to zStart, I personnally don't use Symbolic so I would not see it in zStart. And the only things I use in Omnicalc are fast apps, parentheses assistant, hide finance, and entries menu, and I can live without those (except maybe hide finance) so I would not say that it should be included either, or at least not all of it.

TIfanx1999 · « **Reply #1111 on:** March 13, 2014, 05:56:45 pm »

Just FYI, rabbitsign should be available on Ticalc as well.

Runer112 · « **Reply #1112 on:** March 13, 2014, 08:42:21 pm »

Quote from: TheCoder1998 on March 13, 2014, 02:34:34 pm

maybe they don't take up the full space

I believe they more or less do.

Quote from: TheCoder1998 on March 13, 2014, 02:34:34 pm

if thepenguin can make a 2-page app, he can make a 3- or 4-page app too right?

What's the point, then? It seems like all it would do is get rid of two physical applications and their menu entries without saving any archive space, which seems like a lot of work for not much benefit. And then things would start getting messy with multiple versions of zStart for people who do and don't want Omnicalc, people who do and don't want Symbolic, etc.

thepenguin77 · « **Reply #1113 on:** March 13, 2014, 08:58:57 pm »

Quote from: Hayleia on March 13, 2014, 03:57:14 am

You can sign it yourself, that's what I did. Just get RabbitSign somewhere and drag-and-drop zStart on the "drag and drop over me" file

I'm not really sure how I messed this one up because I literally did this before I uploaded it. Oh well.

Quote from: Runer112 on March 13, 2014, 07:21:23 am

I'm not sure about the whole gray comments thing. You'd need to be constantly updating the screen for the gray to look solid, which means allocating about 2/3 of CPU time just to grayscale updates. Not only would that result in a pretty noticeable slowdown of the editor, but it would probably have a large (negative) impact on battery life, as well.

And then there's the implementation difficulty, too.

All of that and then the fact that it would take another 1.5KB of ram. I tried to make this program editor emulate the TI-OS one, so to have a program that's not supposed to actually use any ram at all use total probably would have some interference issues.

Interestingly though, I display the screen with fastCopy. So in principle, grayscale is possible.

Hayleia · « **Reply #1114 on:** March 14, 2014, 01:43:01 am »

Quote from: Runer112 on March 13, 2014, 08:42:21 pm

Quote from: TheCoder1998 on March 13, 2014, 02:34:34 pm
if thepenguin can make a 2-page app, he can make a 3- or 4-page app too right?

What's the point, then? It seems like all it would do is get rid of two physical applications and their menu entries without saving any archive space, which seems like a lot of work for not much benefit. And then things would start getting messy with multiple versions of zStart for people who do and don't want Omnicalc, people who do and don't want Symbolic, etc.

But everyone wants MirageOS libs, no ? It allows to run every single program (except maybe 20).

Runer112 · « **Reply #1115 on:** March 14, 2014, 07:15:52 am »

Quote from: Hayleia on March 14, 2014, 01:43:01 am

Quote from: Runer112 on March 13, 2014, 08:42:21 pm
Quote from: TheCoder1998 on March 13, 2014, 02:34:34 pm
if thepenguin can make a 2-page app, he can make a 3- or 4-page app too right?

What's the point, then? It seems like all it would do is get rid of two physical applications and their menu entries without saving any archive space, which seems like a lot of work for not much benefit. And then things would start getting messy with multiple versions of zStart for people who do and don't want Omnicalc, people who do and don't want Symbolic, etc.
But everyone wants MirageOS libs, no ? It allows to run every single program (except maybe 20).

If there's leftover space in a two-page version of zStart, I can definitely see the point of adding MirageOS libraries. I just wouldn't be in favor of adding a page primarily for it (in that case, just use the original app!). But I believe TheCoder1998 was asking about consuming Omnicalc and Symbolic, which would in all likelihood need most of two pages for themselves, which I'm not as keen on and is what that quote was supposed to address.

TIfanx1999 · « **Reply #1116 on:** March 14, 2014, 08:27:54 am »

^Pretty much agree. I could see adding the Mirage stuff, and have actually been pondering something similar myself. The others though, I don't see much sense to adding.

TheCoder1998 · « **Reply #1117 on:** March 14, 2014, 10:53:11 am »

um, i have noticed some significant bugs in the program editor
sometimes when editing a large program from archive, some code gets replaced and the whole screen gets garbled

ClrDraw · « **Reply #1118 on:** March 14, 2014, 11:58:38 am »

Could somebody put a screenshot of the small editor? I don't have a link cable (or wabbitemu) at the moment to try it out

dinosteven · « **Reply #1119 on:** March 14, 2014, 03:17:02 pm »

Just me running over some random code and scrolling. At the end, I kinda demonstrate how it breaks when Mathprint is enabled. Well, Mathprint sucks, too bad.

Aspiring · « **Reply #1120 on:** March 14, 2014, 04:02:39 pm »

Hmm... That error is too bad... but it won't affect me because it finally became important enough for me too downgrade from 2.55 to 2.43

I will miss a little bit about mathprint (mostly realistic square roots, logBASE, and powers) but I am sick of having to avoid doing certian things just to keep my calc from crashing due to mathprint.

Thank you sooooo much thepenguin77!!!! I have been waiting for a small text editor for a long time! You definitely earned a +1

I love how zStart works so well with omnicalc.

Runer112 · « **Reply #1121 on:** March 14, 2014, 07:29:15 pm »

You guys know you can turn of MathPrint, right? That severely reduces the number of "bugs" caused by MathPrint. And I put "bugs" in quotes because with MathPrint off, I've never seen it causes any issues itself. I think the issues are caused by programs like Omnicalc expecting certain things to be a certain way, but they changed with the MathPrint OSes.

DJ Omnimaga · « **Reply #1122 on:** March 15, 2014, 12:02:03 pm »

Quote from: Runer112 on March 14, 2014, 07:29:15 pm

You guys know you can turn of MathPrint, right? That severely reduces the number of "bugs" caused by MathPrint. And I put "bugs" in quotes because with MathPrint off, I've never seen it causes any issues itself. I think the issues are caused by programs like Omnicalc expecting certain things to be a certain way, but they changed with the MathPrint OSes.

ROL2 and Reuben have display issues even in. Classic mode. The 7th small text pixel row fix also no longer works.

Freyaday · « **Reply #1123 on:** March 15, 2014, 08:02:38 pm »

Is there any way to add some sort of "suspend" to the program editor? Press a button and you're at the homescreen, where you can math out that constant you need, and then press it again and you're back where you were.

Runer112 · « **Reply #1124 on:** March 15, 2014, 08:09:16 pm »

Quote from: Freyaday on March 15, 2014, 08:02:38 pm

Is there any way to add some sort of "suspend" to the program editor? Press a button and you're at the homescreen, where you can math out that constant you need, and then press it again and you're back where you were.

Now that's an idea I could really get behind.

Author Topic: zStart - an app that runs on ram clears (Read 334551 times)

Hayleia

Re: zStart - an app that runs on ram clears

TIfanx1999

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears

thepenguin77

Re: zStart - an app that runs on ram clears

Hayleia

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears

TIfanx1999

Re: zStart - an app that runs on ram clears

TheCoder1998

Re: zStart - an app that runs on ram clears

ClrDraw

Re: zStart - an app that runs on ram clears

dinosteven

Re: zStart - an app that runs on ram clears

Aspiring

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears

DJ Omnimaga

Re: zStart - an app that runs on ram clears

Freyaday

Re: zStart - an app that runs on ram clears

Runer112

Re: zStart - an app that runs on ram clears